Language selection


Canada–Germany 2023-24 collaborative industrial research and development call for proposals (NRC IRAP-ZIM Call 11)

From: National Research Council Canada

1. Introduction

Working together, the Government of Canada and the Government of Germany aim to foster and support collaborative industrial research and development (R&D) projects with high potential for commercialization. This call for proposals is open to companies from Canada and Germany who wish to perform joint R&D leading to technology commercialization focused on developing innovative products, processes, or technology-based services in all technological and application areas which have strong market potential.

The National Research Council of Canada (NRC) and the German Federal Ministry for Economic Affairs and Climate Action (BMWK) will provide access to public funding for joint projects through the BMWK's ZIM program (Central Innovation Program for SMEs) in Germany, and through the National Research Council of Canada Industrial Research Assistance Program (NRC IRAP) in Canada.

NRC IRAP and AiF Projekt GmbH (the project management agency for BMWK) will provide all necessary assistance to project partners during the project proposal, evaluation and monitoring phases.

2. Application deadlines

Canadian registration deadline: April 21, 2023

Canadian expression of interest deadline: April 28, 2023

German optional project sketch deadline: May 8, 2023

International consortium project proposal deadline: June 30, 2023

3. Sectors of focus

This call for proposals is open to projects in all sectors that are civilian in nature.

4. Eligibility requirements

To be considered for funding, applicants must form a project consortium and develop a collaborative R&D project that meets the following criteria:

4.1 Canadian eligbility requirements

4.2 Consortium

4.3 Project

4.4 German eligibility requirements

Please consult the German call for proposals announcement (only available in German) for German eligibility requirements.

5. Funding

Eligible project participants in collaborative projects selected through this call for proposals may receive funding from their respective national funding body. Funds will be provided in accordance with the applicable laws, regulations, rules and procedures established by the relevant national funding body, country, jurisdiction and/or program.

Non-eligible project participants (e.g. universities, research institutes, etc., and other companies) are welcome to participate on a self-funded basis or as sub-contractors to funded participants, according to each country's funding regulations.

Additional country-specific funding parameters are outlined below:

5.1 Canadian funding

In Canada, this call for proposals is offered through the National Research Council of Canada Industrial Research Assistance Program (NRC IRAP). NRC IRAP is responsible for delivering this call for proposals and for managing any resulting funding agreements.

Eligible Canadian SMEs may receive up to 50 % reimbursement of eligible project costs up to a maximum total funding amount of $500,000 CAD over 12 to 24 months (an extension of 12 months may be considered if sufficiently justified and accepted by both countries).

Note: Canadian SME applicants must be eligible for funding as NRC IRAP clients before they can be considered for funding through this call for proposals. For more information on NRC IRAP eligibility and becoming a client, please contact NRC IRAP at 1-877-994-4727.

Note: Canadian SME applicants may apply to more than 1 NRC IRAP call for proposals simultaneously.  However, NRC IRAP may limit the number of funded projects per applicant. Canadian SME applicants who are applying to more than 1 opportunity or who have ongoing NRC IRAP projects should speak to their NRC IRAP representative for more information.

5.2 German funding

In Germany, this call for proposals is administered by AiF Projekt GmbH and offered through Zentrales Innovationsprogramm Mittelstand (ZIM). AiF Projekt GmbH is responsible for the delivery of this call for proposals and the management of any resulting funding agreements.

Please consult the ZIM website call for proposals announcement (in German only) for funding parameters.

6. Application process

Application processes and evaluations will be performed independently by each national funding body in accordance with their national and institutional laws and regulations. Once each national funding body has evaluated the submitted applications, a final joint project selection will be performed.

Each applicant must submit all required documents to, and meet the due diligence process of, their respective national funding body. Failure at any point or for any reason to do so may cause the entire collaborative project application to be considered incomplete or ineligible and render the entire project consortium ineligible for funding through this call for proposals.

Information on respective application processes follows below:

6.1 Canadian application process

The Canadian application process has 4 phases:

  1. Registration
  2. Expression of interest
  3. International consortium project proposal
  4. National funding body proposal and funding agreement

Step 1: Registration phase

Each Canadian applicant must register using the register button at the end of this page. Basic information about the applicant and the organization will be required upon registration.

NRC IRAP will review registrations for this call for proposals and contact applicants if more information is required. Qualifying applicants will proceed to the next phase and be invited to submit an expression of interest form.

Step 2: Expression of interest phase

During this phase, each Canadian applicant seeking funding must submit an expression of interest (EOI) form outlining basic information on the applicant and the collaborative project.

While completing the EOI form, each Canadian applicant is encouraged to contact their NRC IRAP representative to discuss their project idea and receive guidance on preparing their submission.

It is recommended that applicants submit the EOI as early as possible. EOIs will be evaluated by the applicant's NRC IRAP representative and the NRC IRAP International Office. Qualifying applicants will be invited to submit the more detailed international consortium project proposal in collaboration with their project partners.

Step 3: International consortium project proposal phase

During the international consortium project proposal (ICPP) phase, all project partners work together to complete and submit an application package to each implicated national funding body. The contents of the ICPP package are unique to each national funding body.

In this call for proposals, the Canadian ICPP application package consists of:

  1. an international consortium project proposal/joint application form outlining the:
    • project consortium,
    • collaborative project,
    • expected outcomes, and
    • funding request.
  2. a draft international consortium agreement describing:
    • roles and responsibilities of each consortium member,
    • project management framework,
    • financial plan,
    • division of intellectual property rights,
    • confidentiality and publication agreements, and
    • liability clauses.
  3. an NRC IRAP Canadian Annex form containing additional information required for the NRC IRAP assessment of the project including:
    • information about the Canadian SME,
    • information about make up of the project consortium, and
    • information related to the structure of the project.

Canadian ICPP applications will be evaluated by an NRC IRAP evaluation team including the applicant's NRC IRAP representative and the NRC IRAP International Office. Next, the amalgamated evaluation results will be shared between all implicated national funding bodies to jointly select the collaborative projects that will be invited to proceed to the final national funding body proposal and funding agreement stage.

Step 4: National funding body proposal and funding agreement phase

During the national funding body proposal and funding agreement phase, all eligible project partners work independently to complete funding proposals and sign legally binding funding agreements with their respective national funding body. Canadian applicants will work with their NRC IRAP representative to prepare an NRC IRAP funding proposal and contribution agreement.

6.2 German application process

The German application process has 2 phases: the optional German Project Sketch phase and the project proposal phase. Each German project partner must file an individual ZIM application to AiF Projekt GmbH. Please consult the German call for proposals announcement (available in German only) for full official instructions related to the German application process and requirements.

7. Contacts

For questions, concerns, or for more information, please contact the appropriate call for proposals representative listed below:

Canadian Contact

Andrew Bauder
NRC IRAP Germany National Program Coordinator
National Research Council of Canada Industrial Research Assistance Program

German Contact

Georg Nagel
Director International Cooperation
AiF Projekt GmbH

8. Register

Canadian SME participants must be registered NRC IRAP clients. If not already an NRC IRAP client, Canadian SMEs must contact 1-877-994-4727 to determine if they might be eligible for support through the NRC IRAP.

To begin the application process, interested Canadian participants must first register online to receive an Expression of Interest form by clicking the register button.