[CCMC 14062-L] CCMC Standard compliance evaluation

From: National Research Council Canada

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

  • Comfort-R
  • Quik-Therm™
  • Thermal 3Ht

Product description

The products are faced and unfaced rigid board thermal insulation made of moulded/expanded polystyrene (EPS).

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product namesManufacturing plant
Starbuck, MB, CA
Comfort-RProduct evaluated by the CCMC
Quik-Therm™Product evaluated by the CCMC
Thermal 3HtProduct evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CAN/ULC-S701-11, Type 3Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering

The design thermal resistance value is 18.5 m2·KW−1 /m at a design density of 8.65 kg/m3.

This product must be installed in unconfined spaces with slopes not exceeding 4.5:12 according to the following application chart.

Table 1. Application and installation requirements of the products
Thermal resistance (m2·K/W-1) Minimum mass/unit area (kg/m2) Minimum installed thickness (mm) Maximum net coverage per 13.6 kg bag (m2) Maximum net coverage per 15 kg bag (m2)
2.10 0.90 112 15.1 16.7
2.80 1.20 150 11.4 12.5
3.50 1.50 187 9.1 10.0
4.20 1.80 225 7.6 8.3
4.90 2.10 262 6.5 7.2
5.60 2.40 299 5.7 6.3
6.30 2.70 337 5.0 5.6
7.00 2.99 374 4.5 5.0
7.70 3.29 412 4.1 4.6
8.40 3.59 449 3.8 4.2
8.75 3.74 468 3.6 4.0
9.10 3.89 487 3.5 3.9
9.80 4.19 524 3.2 3.6
10.50 4.49 561 3.0 3.3

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.


The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.


Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.


© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2023

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.

Date modified: