Search

[CCMC 13460-L] CCMC Standard compliance evaluation

From: National Research Council Canada

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

  • H-Shield
  • H-Shield CG
  • H-Shield F
  • Xci 286
  • Xci CG
  • Xci CG (Class A)
  • Xci Class A
  • Xci Foil
  • Xci Foil (Class A)

Product description

Table 1. Description of products and facer materials
Product name Product description
H-Shield Rigid board, polyisocyanurate thermal insulation covered with a fibre-reinforced facer on both sides
H-Shield CG Rigid board, polyisocyanurate thermal insulation covered with coated glass facers on both sides.
Xci CG
Xci CG (Class A)
H-Shield F Rigid board, polyisocyanurate thermal insulation covered with foil facers on both sides.
Xci Foil
Xci Class A Rigid board, polyisocyanurate thermal insulation covered with foil facers on both sides.
Xci Foil (Class A)
Xci 286


The products are manufactured in 1 220 mm × 1 220 mm and 1 220 × 2 440 mm panels in thicknesses ranging from 25 mm to 114 mm.

Manufacturing plants

This evaluation is limited to products produced at the following plants:

Product namesManufacturing plants
Franklin Park, IL, USMontgomery, NY, USPuyallup, WA, USSmithfield, PA, USTooele, UT, US
H-ShieldProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
H-Shield CGProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
H-Shield FProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
Xci 286Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC--
Xci CG-Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
Xci CG (Class A)-Product evaluated by the CCMCProduct evaluated by the CCMC--
Xci Class AProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC--
Xci FoilProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
Xci Foil (Class A)Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC--

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CAN/ULC-S704-11, Type 1, Class 3Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced
CAN/ULC-S704-11, Type 2, Class 1Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced
CAN/ULC-S704-11, Type 3, Class 1Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced
CAN/ULC-S704-11, Type 3, Class 2Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced

The following information is provided for use by design professionals and is based on data submitted to CCMC as part of the evaluation:

Table 2. Classification, design long-term thermal resistance (LTTR) and water vapour permeance (WVP) specifications
Product name Classification Design LTTR (m2·°C/W)(1) WVP (ng/(Pa·s·m2))Table footnote (2)
Thickness 25 mm 50 mm 75 mm 25.4 mm
H-Shield Type 1, Class 3 0.94 1.88 2.87 62.3Table footnote (3)
H-Shield CG and Xci CG Type 1, Class 3 0.94 1.85 2.79 67.4Table footnote (4)
H-Shield F and Xci Foil Type 2, Class 1 1.03 1.98 2.98 0.72
Xci Class A, Xci Foil (Class A) and Xci 286 Type 3, Class 1 0.93 1.85 2.91 0.11
Xci CG (Class A) Type 3, Class 2 0.92 1.81 2.74 56.1Table footnote (5)


 

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2024

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.

Date modified: