Language selection

Search


[CCMC 13274-L] CCMC Standard compliance evaluation

From: National Research Council Canada

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

  • Elevate ISO 95+ GL
  • Elevate ISOGARDTM CG
  • Elevate ISOGARDTM GL
  • Elevate RESISTATM

Product description

The products are polyisocyanurate foam, rigid-board thermal insulation with the following characteristics: 

Table 1. Product information
Product Facing Length, mm Width, mm Thicknesses, mm Other
Elevate ISO 95+TM GL Cellulosic glass reinforced mat facer on both sides 1 219, 2 438 1 219 12.7 to 114.3 Flat or tapered boards with a slope ranging from 0.5% to 4.0%
Elevate ISOGARDTM CG Double-coated fibreglass facer on both sides 1 219, 2 438 1 219 25.4 to 101.6 Flat or tapered boards with a slope ranging from 0.5% to 4.0%
Elevate ISOGARDTM GL Cellulosic glass- reinforced mat facer on both sides 1 219, 2 438 1 219 25.4 to 101.6 Flat or tapered boards with a slope ranging from 0.5% to 4.0%
Elevate RESISTATM Double-coated fibreglass facer on both sides 1 219, 2 438 1 219 12.7 to 101.6 Flat or tapered boards with a slope ranging from 0.5% to 4.0%

Manufacturing plants

This evaluation is limited to products produced at the following plants:

Product namesManufacturing plants
Bristol, CT, USDeforest, WI, USFlorence, KY, USSalt Lake City, UT, USYoungwood, PA, US
Elevate ISO 95+ GL--Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
Elevate ISOGARDTM CGProduct evaluated by the CCMCProduct evaluated by the CCMC---
Elevate ISOGARDTM GLProduct evaluated by the CCMCProduct evaluated by the CCMC---
Elevate RESISTATM--Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CAN/ULC-S704-11, Type 1, Class 3Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced
CAN/ULC-S704-11, Type 2, Class 2Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced

The products' classification, long-term thermal resistance (LTTR) and water vapour permeance (WVP) values are provided in the following tables.

CAN/ULC-S704-03
Table 2. Classification, long-term thermal resistance and water vapour permeance of the product
Product Classification LTTR (m2·°C/W)1 WVP (ng/(Pa·s·m2))Table footnote (1)
Thickness Thickness
25 mm 50 mm 75 mm 25.4 mm
Elevate ISO 95+TM GL Type 1, Class 3 1.02 2.06 3.15 72.57
CAN/ULC-S704-11
Table 3. Classification, long-term thermal resistance and water vapour permeance of the products
Product Classification LTTR
(m2·°C/W)(1)
WVP
(ng/(Pa·s·m2))Table footnote (1)
Thickness Thickness
25 mm 50 mm 75 mm 25.4 mm
Elevate ISOGARDTM CG Type 2, Class 2 1.00 1.99 3.04 52.10
Elevate ISOGARDTM GL Type 2, Class 2 1.00 1.99 3.04 50.50
Elevate RESISTATM Type 1, Class 3 0.97 1.92 2.91 64.00

 

Administrative information

Disclaimer

This evaluation is issued by the Canadian Construction Materials Centre (CCMC), part of the Construction Research Centre at the National Research Council of Canada (NRC). The evaluation must be read in the context of the entire CCMC Registry of Product Assessments and the legislated applicable building code in effect.

The CCMC was established in 1988 on behalf of the applicable regulator (i.e., the provinces and territories) to ensure—through assessment—conformity of alternative and acceptable solutions to regional building codes as determined by the local authority having jurisdiction (AHJ) as part of the issuance of a building permit.

It is the responsibility of the local AHJs, design professionals, and specifiers to confirm that the evaluation is current and has not been withdrawn or superseded by a later issue. Please refer to the website or contact:

Canadian Construction Materials Centre
Construction Research Centre
National Research Council of Canada
1200 Montreal Road
Ottawa, Ontario, K1A 0R6
Telephone: 613-993-6189
Fax: 613-952-0268

The NRC has evaluated the material, product, system or service described herein only for those characteristics stated herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (i.e., AHJs, design professionals and specifiers). This evaluation is only valid when the product is installed in strict compliance with the stated conditions and limitations of evaluation and the applicable local building code. In circumstances where no applicable local building permit is issued and that no confirmation of compliance ‘for use in the intended field application’ is undertaken, this evaluation is null and void in all respects. This evaluation is provided without representation, warranty, or guarantee of any kind, expressed, or implied, and the NRC provides no endorsement for any evaluated material, product, system or service described herein. The NRC accepts no responsibility whatsoever arising in any way from any and all use and reliance on the information contained in this evaluation with respect to its compliance to the referenced code(s) and standard(s). The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2022

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.