[CCMC 13188-L] CCMC Standard compliance evaluation

CCMC number:

13188-L

Status:

Active

Issue date:

2005-06-03

Modified date:

2023-11-08

Evaluation holder:

IKO Industries Ltd.

40 Hansen Road South
Brampton ON L6W 3H4
Canada
Telephone: 905-457-2880

Product name:

ENERFOIL Polyisocyanurate Foam Insulation

Criteria:

CAN/ULC-S704-11, Type 1, Class 1, "Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced"

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product name

ENERFOIL Polyisocyanurate Foam Insulation

Product description

The product is rigid-board polyisocyanurate thermal insulation. The product is faced as follows:

Table 1. Facer Type
Product	Facing
ENERFOIL Polyisocyanurate Foam Insulation	foil facers on both sides

The board is manufactured 1.2 m × 2.4 m in size and in thicknesses ranging from 12 mm to 100 mm.

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product name	Manufacturing plant
Product name	Brampton, ON, CA
ENERFOIL Polyisocyanurate Foam Insulation	Product evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number	Criteria name
CAN/ULC-S704-11, Type 1, Class 1	Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced

Table 2. **Classification, design LTTR and WVP specifications for the product**
Product name	Classification	Design LTTR (m²·°C/W) ^{Footnote (1)} thickness			WVP (ng/(Pa·s·m²)) thickness
Product name	Classification	25 mm	50 mm	75 mm	25.4 mm
ENERFOIL Polyisocyanurate Foam Insulation	Type 1, Class 1	1.01	1.98	3.01	3.30

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.