[CCMC 13184-L] CCMC Standard compliance evaluation
From: National Research Council Canada

CCMC number: | 13184-L |
Status: | Active |
Issue date: | 2005-04-13 |
Modified date: | 2023-09-14 |
Evaluation holder: | Soprema Inc.
1688 rue Jean-Berchmans-Michaud |
Product names: |
|
Criteria: |
|
In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.
Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.Product information
Product names
- Lastobond 195
- Lastobond Sanded Finish
Product description
The product is a self-adhering polymer modified bituminous membrane that is reinforced with a glass-fibre mesh that can be used as an eave protection. The membrane is surfaced with fine, black mineral sand on one side and a silicone release paper on the other side.
The membrane is 1.6 mm thick and is available in rolls that are 910 mm wide and 20 m long.
Manufacturing plants
This evaluation is limited to products produced at the following plants:
Product names | Manufacturing plants | |
---|---|---|
Chilliwack, BC, CA | Drummondville, QC, CA | |
Lastobond 195 | Product evaluated by the CCMC | Product evaluated by the CCMC |
Lastobond Sanded Finish | Product evaluated by the CCMC | Product evaluated by the CCMC |
Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC
Technical information
This evaluation is based on demonstrated conformance with the following criteria:
Criteria number | Criteria name |
---|---|
CSA A123.22-08, Type I | Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection |
Administrative information
Use of Canadian Construction Materials Centre (CCMC) assessments
This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).
It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.
Disclaimer
The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.
This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.
Language
Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.
Copyright
© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2023
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.