[CCMC 13074-L] CCMC Standard compliance evaluation
From: National Research Council Canada
| CCMC number: | 13074-L |
| Status: | Active |
| Issue date: | 2002-07-16 |
| Modified date: | 2022-11-17 |
| Evaluation holder: | DDP Specialty Electronic Materials US, LLC (company of DuPont)
974 Centre Road, Building 730 |
| Product names: |
|
| Evaluation requirements: |
In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.
Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.Product information
Product names
- Enerfoam™
- GREAT STUFF PRO™ Gaps & Cracks
- GREAT STUFF PRO™ Multipurpose Black Insulating Foam Sealant
- GREAT STUFF PRO™ Pestblock
- GREAT STUFF PRO™ Window and Door
- GREAT STUFF™ Big Gap Filler
- GREAT STUFF™ Fireblock
- GREAT STUFF™ Gaps & Cracks
- GREAT STUFF™ Multipurpose Black
- GREAT STUFF™ Multipurpose White
- GREAT STUFF™ Pestblock
- GREAT STUFF™ Pond & Stone
- GREAT STUFF™ Window & Door
Product description
The products are one-component, polyurethane expanding foam, which can be used as a sealant to maintain continuity and control air leakage at penetrations (i.e., windows and doors) within the Dow WEATHERMATE™ Housewrap air barrier system, or in the case of the GREAT STUFF™ Multipurpose White, within the Dupont Tyvek® HomeWrap® air barrier system. The product is packaged in pressurized containers and is available in various sizes.
Note: The CAN/ULC-S710.1 standard specifies that durability of the foam is assessed as the continuity component in an air barrier system between:
- the principal plane of airtightness (i.e., polyethylene sheet or other proprietary products specified as the designated air barrier system); and
- the window or door (i.e., wood, vinyl, aluminum).
The following table lists the results of testing the wood and vinyl elements, which were sealed to the specified air barrier material (excluding the GREAT STUFF Multipurpose White) as part of the proprietary air barrier system. The durability of the product was assessed with the following substrates at the window/wall interface:
| Window or door frame | Air barrier material | Result |
|---|---|---|
| Wood | Dow WEATHERMATE™ Housewrap | pass |
| Vinyl | Dow WEATHERMATE™ Housewrap | pass |
The followng table lists the results of testing the wood and vinyl elements, which were sealed to the specified air barrier material, using the GREAT STUFF™ Multipurpose White as part of the proprietary air barrier system. The durability of the product was assessed with the following substrates at the window/wall interface:
| Window or door frame | Air barrier material | Result |
| Wood | Dupont™ Tyvek® HomeWrap® | pass |
| Vinyl | Dupont™ Tyvek® HomeWrap® | pass |
Manufacturing plant
This evaluation is valid only for products produced at the following plant:
| Product names | Manufacturing plant |
|---|---|
| Wilmington, IL, US | |
| Enerfoam™ | Product evaluated by the CCMC |
| GREAT STUFF PRO™ Gaps & Cracks | Product evaluated by the CCMC |
| GREAT STUFF PRO™ Multipurpose Black Insulating Foam Sealant | Product evaluated by the CCMC |
| GREAT STUFF PRO™ Pestblock | Product evaluated by the CCMC |
| GREAT STUFF PRO™ Window and Door | Product evaluated by the CCMC |
| GREAT STUFF™ Big Gap Filler | Product evaluated by the CCMC |
| GREAT STUFF™ Fireblock | Product evaluated by the CCMC |
| GREAT STUFF™ Gaps & Cracks | Product evaluated by the CCMC |
| GREAT STUFF™ Multipurpose Black | Product evaluated by the CCMC |
| GREAT STUFF™ Multipurpose White | Product evaluated by the CCMC |
| GREAT STUFF™ Pestblock | Product evaluated by the CCMC |
| GREAT STUFF™ Pond & Stone | Product evaluated by the CCMC |
| GREAT STUFF™ Window & Door | Product evaluated by the CCMC |
Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC
Technical information
This evaluation is based on demonstrated conformance with the following criteria:
| Criteria number | Criteria name |
|---|---|
| CAN/ULC-S710.1-11, Class 2 | Standard for Thermal Insulation – Bead-Applied One Component Polyurethane Air Sealant Foam, Part 1: Material Specification |
- 1 day plus 1 hour for GREAT STUFF PRO™ Gaps & Cracks, Enerfoam and GREAT STUFF PRO™ Pestblock;
- 1 day plus 2 hours for GREAT STUFF™ Window & Door and GREAT STUFF PRO™ Window and Door; and
- 1 day plus 2 hours for GREAT STUFF™ PRO Multipurpose Black Insulating Foam Sealant, GREAT STUFF™ Gaps & Cracks, GREAT STUFF™ Big Gap Filler, GREAT STUFF™ Pestblock, GREAT STUFF™ Fireblock, GREAT STUFF™ Multipurpose Black and GREAT STUFF™ Pond & Stone.
GREAT STUFF™ Multipurpose White conforms to both CAN/ULC-S710.1-11 and CAN/ULC-S710.1:2019, “Standard For Bead-Applied One Component Polyurethane Air Sealant Foam, Part 1: Material Specification.” The time period before occupancy is 1 day.
GREAT STUFF™ Fireblock has not been evaluated as part of this CCMC listing to obtain a fire-resistance rating. Consult the manufacturer for more information.
Administrative information
Use of Canadian Construction Materials Centre (CCMC) assessments
This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).
It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.
Disclaimer
The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.
This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.
Language
Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.
Copyright
© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2023
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.
CCMC recognition
The Canadian Construction Materials Centre (CCMC) assesses compliance with Canadian building, energy and safety codes. We are the only construction code compliance service supported and operated by the Government of Canada. Trusted by over 6,000 regulators across Canada.
CCMC assessments are recognized by construction authorities across Canada:
| Alliance of Canadian Building Official Associations (ACBOA) |  |
| First Nations National Building Officers Association (FNNBOA) |  |
| Canadian Home Builders’ Association (CHBA) |  |
| Alberta Building Officials Association (ABOA) |  |
| Saskatchewan Building Officials Association (SBOA) |  |
| Manitoba Building Officials Association (MBOA) |  |
| Ontario Building Officials Association (OBOA) |  |
| New Brunswick Building Officials Association (NBBOA) |  |
| Nova Scotia Building Officials Association (NSBOA) |  |
The CCMC provides code compliance assessments to Canadian code requirements, consulting nationwide with construction regulators to elicit regional variations in code requirements as well as provincial and local interpretations. Users are advised to review the technical information presented in CCMC assessments when making approval decisions. Learn more about how the CCMC provides a unique service for Canada.
For more information, contact the CCMC by phone at (613) 993-6189 or by email at ccmc@nrc-cnrc.gc.ca
