Search

[CCMC 12895-L] CCMC Standard compliance evaluation

From: National Research Council Canada

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

  • ISO R PLUS premium
  • ISOCLAD
  • ISOFIX 160
  • ISOFLOT
  • ISOLOFOAM HD 160
  • ISOLOFOAM HD 20
  • ISOLOFOAM Type 2
  • ISOLOFOAM XHD 200
  • ISOPENTE Type 2
  • ISOPREMIUM 160
  • ISOPREMIUM 180
  • ISORAD
  • ISORAD V2 160
  • ISOSHIELD Premium 180
  • iFLEXFOAM 160

Product description

The products are thermal insulation that are rigid expanded polystyrene boards or panels.

Product Description
ISOLOFOAM Type 2 rigid expanded polystyrene insulation board
ISOPENTE Type 2 rigid expanded polystyrene sloped insulation panel
ISOPREMIUM 160 rigid expanded polystyrene insulation panel made of expanded/moulded polystyrene
with graphite particles
ISOLOFOAM HD 160 rigid expanded polystyrene insulation board
ISO R PLUS Premium rigid expanded polystyrene insulation panel made of expanded/moulded polystyrene with graphite
particles and laminated with an aluminized polypropylene membrane
ISOLOFOAM XHD 200 rigid expanded polystyrene insulation board
iFLEXFOAM 160 rigid expanded polystyrene insulation panel with a laminated polypropylene membrane on each side and integrating a proprietary clipping system
ISORAD V2 160 rigid expanded polystyrene insulation panel with a multidirectional tube retaining design
and a proprietary clipping system
ISOFIX 160 rigid expanded polystyrene insulation panel with grooves
ISOCLAD rigid expanded polystyrene insulation panel laminated to a spun-bonded olefin sheathing membrane
ISOPREMIUM 180 rigid expanded polystyrene insulation panel made of expanded/moulded polystyrene
with graphite particles
ISOLOFOAM HD 20 rigid expanded polystyrene insulation board
ISORAD rigid expanded polystyrene insulation panel with raised grooves for tubing insertion
ISOSHIELD 160 Rigid expanded polystyrene insulation panel made of expanded polystyrene laminated with a grey polypropylene membrane on one side and an aluminized one on the other
ISOSHIELD Premium 180 rigid expanded polystyrene insulation panel made of expanded polystyrene with graphite particles and laminated with a grey polypropylene membrane on one side and an aluminized one on the other
ISOFLOT rigid expanded polystyrene block

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product namesManufacturing plant
Sainte-Marie-de Beauce, QC, CA
ISO R PLUS premiumProduct evaluated by the CCMC
ISOCLADProduct evaluated by the CCMC
ISOFIX 160Product evaluated by the CCMC
ISOFLOT-
ISOLOFOAM HD 160Product evaluated by the CCMC
ISOLOFOAM HD 20Product evaluated by the CCMC
ISOLOFOAM Type 2Product evaluated by the CCMC
ISOLOFOAM XHD 200Product evaluated by the CCMC
ISOPENTE Type 2Product evaluated by the CCMC
ISOPREMIUM 160Product evaluated by the CCMC
ISOPREMIUM 180Product evaluated by the CCMC
ISORADProduct evaluated by the CCMC
ISORAD V2 160Product evaluated by the CCMC
ISOSHIELD Premium 180-
iFLEXFOAM 160Product evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CAN/ULC-S701.1:2017, Type 2Standard for Thermal Insulation, Polystyrene Boards

The evaluation of these products is based solely on their certification and listing by Intertek Testing Services (ITS) NA Ltd.

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2023

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.

Date modified: