Language selection

Search


[CCMC 12642-L] CCMC Standard compliance evaluation

From: National Research Council Canada

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

  • Attic Protector Blowing Wool Insulation
  • Johns Manville Climate Pro

Product description

The products are a mineral-fibre building insulation made from glass fibre and designed for pneumatic application using commercially available blowing equipment.

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product namesManufacturing plant
Innisfail, AB, CA
Attic Protector Blowing Wool InsulationProduct evaluated by the CCMC
Johns Manville Climate ProProduct evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CAN/ULC-S702.1:2014, Amendment 1, Type 5Standard for Mineral Fibre Thermal Insulation for Buildings, Part 1: Material Specification

The design thermal resistance value is 19.35 (m2 ·K)/W−1/m at a design density of 8.33 kg/m3.

The products must be installed in unconfined spaces with slopes not exceeding 4.5:12, and according to the following application charts:

Table 1. Coverage chart for Johns Manville Climate Pro
Thermal resistanceTable footnote (1) Minimum thicknessTable footnote (2)Table footnote (3) Minimum mass/area Maximum Coverage/Bag Minimum Bags/Area
RSI R mm in. kg/m2 psf m2 ft2 100 m2 1000 ft2
2.1 12 114 4.5 0.83 0.17 17.1 184.2 5.2 5.4
2.8 16 150 5.9 1.13 0.23 12.7 136.6 7.8 7.3
3.5 20 183 7.2 1.40 0.29 10.2 110.0 9.8 9.1
4.2 24 218 8.6 1.70 0.35 8.4 90.4 11.9 11.1
4.9 28 251 9.9 1.99 0.41 7.2 77.2 13.9 13.0
5.6 32 284 11.2 2.29 0.47 6.2 67.1 16.0 14.9
6.3 36 318 12.5 2.60 0.53 5.5 59.1 18.2 16.9
7.0 40 348 13.7 2.89 0.59 4.9 53.2 20.2 18.8
7.7 44 381 15.0 3.22 0.66 4.4 47.8 22.5 20.9
8.4 48 4.11 16.2 3.53 0.72 4.1 43.6 24.7 22.9
8.8 50 427 16.8 3.68 0.75 3.9 41.8 25.8 23.9
9.1 52 442 17.4 3.84 0.79 3.7 40.0 26.9 25.0
9.8 56 472 18.6 4.16 0.85 3.4 36.9 29.1 27.1
10.5 60 503 19.8 4.50 0.92 3.2 34.2 31.5 29.2
11.3 64 531 20.9 4.80 0.98 3.0 32.0 33.6 31.2
12.0 68 561 22.1 5.15 1.05 2.8 29.9 36.0 33.5
12.3 70 574 22.6 5.30 1.08 2.7 29.0 37.1 34.4
12.7 72 589 23.2 5.47 1.12 2.6 28.1 38.3 35.6
13.4 76 617 24.3 5.80 1.19 2.5 26.5 40.6 37.7
14.1 80 645 25.4 6.14 1.26 2.3 25.1 43.0 39.9

 

Table 2. Coverage chart for Attic Protector Blowing Wool Insulation
Thermal resistanceTable footnote (1) Minimum thicknessTable footnote (2)Table footnote (3) Minimum mass/area Maximum Coverage/Bag Minimum Bags/Area
RSI R mm in. kg/m2 psf m2 ft2 100 m2 1000 ft2
2.1 12 114 4.5 0.83 0.17 14.6 157.3 6.8 6.4
2.8 16 150 5.9 1.13 0.23 10.8 116.6 9.2 8.6
3.5 20 183 7.2 1.40 0.29 8.7 39.9 11.5 10.6
4.2 24 218 8.6 1.70 0.35 7.2 77.2 13.9 13.0
4.9 28 251 9.9 1.99 0.41 6.1 65.9 16.3 15.2
5.6 32 284 11.2 2.29 0.47 5.3 57.3 18.8 17.5
6.3 36 318 12.5 2.60 0.53 4.7 50.5 21.3 19.8
7.0 40 348 13.7 2.89 0.59 4.2 45.4 23.7 22.0
7.7 44 381 15.0 3.22 0.66 3.8 40.8 26.4 24.5
8.4 48 4.11 16.2 3.53 0.72 3.5 37.2 28.9 26.8
8.8 50 427 16.8 3.68 0.75 3.3 35.7 30.2 28.0
9.1 52 442 17.4 3.84 0.79 3.2 34.2 31.5 29.2
9.8 56 472 18.6 4.16 0.85 2.9 31.5 34.1 31.7
10.5 60 503 19.8 4.50 0.92 2.7 29.2 36.8 34.2
11.3 64 531 20.9 4.80 0.98 2.5 27.3 39.4 36.6
12.0 68 561 22.1 5.15 1.05 2.4 25.5 42.2 39.2
12.3 70 574 22.6 5.30 1.08 2.3 24.8 43.4 40.3
12.7 72 589 23.2 5.47 1.12 2.2 24.0 44.9 41.7
13.4 76 617 24.3 5.80 1.19 2.1 22.6 47.5 44.2
14.1 80 645 25.4 6.14 1.26 2.0 24.4 50.3 46.7

Administrative information

Disclaimer

This evaluation is issued by the Canadian Construction Materials Centre (CCMC), part of the Construction Research Centre at the National Research Council of Canada (NRC). The evaluation must be read in the context of the entire CCMC Registry of Product Assessments and the legislated applicable building code in effect.

The CCMC was established in 1988 on behalf of the applicable regulator (i.e., the provinces and territories) to ensure—through assessment—conformity of alternative and acceptable solutions to regional building codes as determined by the local authority having jurisdiction (AHJ) as part of the issuance of a building permit.

It is the responsibility of the local AHJs, design professionals, and specifiers to confirm that the evaluation is current and has not been withdrawn or superseded by a later issue. Please refer to the website or contact:

Canadian Construction Materials Centre
Construction Research Centre
National Research Council of Canada
1200 Montreal Road
Ottawa, Ontario, K1A 0R6
Telephone: 613-993-6189
Fax: 613-952-0268

The NRC has evaluated the material, product, system or service described herein only for those characteristics stated herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (i.e., AHJs, design professionals and specifiers). This evaluation is only valid when the product is installed in strict compliance with the stated conditions and limitations of evaluation and the applicable local building code. In circumstances where no applicable local building permit is issued and that no confirmation of compliance ‘for use in the intended field application’ is undertaken, this evaluation is null and void in all respects. This evaluation is provided without representation, warranty, or guarantee of any kind, expressed, or implied, and the NRC provides no endorsement for any evaluated material, product, system or service described herein. The NRC accepts no responsibility whatsoever arising in any way from any and all use and reliance on the information contained in this evaluation with respect to its compliance to the referenced code(s) and standard(s). The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2022

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.