[CCMC 12426-L] CCMC Standard compliance evaluation

CCMC number:

12426-L

Status:

Active

Issue date:

1992-09-14

Modified date:

2023-11-08

Evaluation holder:

Plasti-Fab Ltd.

300 - 2891 Sunridge Way NE
Calgary AB T1Y 7K7
Canada
Website: www.plastifab.com
Telephone: 403-569-4312
Email: jwhalen@plastifab.com

Product names:

DuroFoam 25
PlastiSpan 25
PlastiSpan 25 Type 3
PlastiSpan 40
PlastiSpan M-30
PlastiSpan M-40
PlastiSpan M28

Criteria:

CAN/ULC-S701-11, Type 3, "Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering"

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

DuroFoam 25
PlastiSpan 25
PlastiSpan 25 Type 3
PlastiSpan 40
PlastiSpan M-30
PlastiSpan M-40
PlastiSpan M28

Product description

The products are thermal insulation materials composed of expanded polystyrene beads that are moulded and cut to rigid board type sections and are available in various sizes. DuroFoam 25 is faced with a polypropylene film on both sides.

Manufacturing plants

This evaluation is limited to products produced at the following plants:

Product names	Manufacturing plants
Product names	Ajax, ON, CA	Crossfield, AB, CA	Delta, BC, CA	Kitchener, ON, CA	Saskatoon, SK, CA	Winnipeg, MB, CA
DuroFoam 25	Product evaluated by the CCMC	Product evaluated by the CCMC	-	-	-	-
PlastiSpan 25	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC
PlastiSpan 25 Type 3	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC
PlastiSpan 40	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC
PlastiSpan M-30	-	Product evaluated by the CCMC	-	-	-	-
PlastiSpan M-40	-	Product evaluated by the CCMC	-	-	-	-
PlastiSpan M28	-	Product evaluated by the CCMC	-	-	-	-

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number	Criteria name
CAN/ULC-S701-11, Type 3	Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering

The evaluation of this product is based solely on its certification and listing by the by Intertek Testing Services (ITS) North America Limited.

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.