[CCMC 11826-L] CCMC Standard compliance evaluation
From: National Research Council Canada
| CCMC number: | 11826-L |
| Status: | Active |
| Issue date: | 1988-09-27 |
| Modified date: | 2022-11-17 |
| Evaluation holder: | Louisiana-Pacific Corporation
1610 West End Ave. Suite 200 |
| Product names: |
|
| Criteria: |
In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.
Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.Product information
Product names
- LP® SmartSide® ExpertFinish® Lap
- LP® SmartSide® ExpertFinish® Panel
- LP® SmartSide® ExpertFinish® Vertical Siding
- LP® SmartSide® Lap
- LP® SmartSide® Panel
- LP® SmartSide® Vertical Siding
Product description
The products are oriented strandboard (OSB) siding planks and panels with the face strands oriented in the machine (long panel) direction. The flakes are treated with zinc borate and bonded with an exterior isocyanate resin (see CCMC 12009-R).
| Product name | Available finish | Siding type | Grade | Length | Width | Thickness |
|---|---|---|---|---|---|---|
| LP® SmartSide® ExpertFinish® Lap | prefinished (or pre-painted - Acrylic paint) on the exterior face as "Smooth Finish" or "Cedar Texture" | Lap | O-1 | 4 877 mm (16 ft.) | 127 mm (5 in.) 152 mm (6 in.) 178 mm (7 in.) 203 mm (8 in.) 241 mm (9 1/2 in.) 305 mm (12 in.) |
9.5 mm (3/8 in.) |
| LP® SmartSide® Lap | phenolic-resin-saturated primed overlay | |||||
| LP® SmartSide® ExpertFinish® Lap | prefinished (or pre-painted - Acrylic paint) on the exterior face as "Smooth Finish" or "Cedar Texture" | Lap | O-2 | 4 877 mm (16 ft.) | 127 mm (5 in.) 152 mm (6 in.) 178 mm (7 in.) 203 mm (8 in.) 241 mm (9 1/2 in.) 305 mm (12 in.) |
11.1 mm (7/16 in.) |
| LP® SmartSide® Lap | phenolic-resin-saturated primed overlay | |||||
| LP® SmartSide® ExpertFinish® Panel | prefinished (or pre-painted - Acrylic paint) on the exterior face as "Smooth Finish" or "Cedar Texture" | Panel | O-1 | 1 219 mm (4 ft.) to 5 486 mm (18 ft.) |
1 219 mm (4 ft.) | 9.5 mm (3/8 in.) |
| LP® SmartSide® Panel | phenolic-resin-saturated primed overlay | |||||
| LP® SmartSide® ExpertFinish® Panel | prefinished (or pre-painted - Acrylic paint) on the exterior face as "Smooth Finish" or "Cedar Texture" | Panel | O-2 | 1 219 mm (4 ft.) to 5 486 mm (18 ft.) |
1 219 mm (4 ft.) | 11.1 mm (7/16 in.) 15.1 mm (19/32 in.) |
| LP® SmartSide® Panel | phenolic-resin-saturated primed overlay | |||||
| LP® SmartSide® ExpertFinish® Vertical Siding | prefinished (or pre-painted - Acrylic paint) on the exterior face as "Smooth Finish" or "Cedar Texture" | Vertical | O-1 | 4 877 mm (16 ft.) | 406 mm (16 in.) | 9.5 mm (3/8 in.) |
| LP® SmartSide® Vertical Siding | phenolic-resin-saturated primed overlay | |||||
| LP® SmartSide® ExpertFinish® Vertical Siding | prefinished (or pre-painted - Acrylic paint) on the exterior face as "Smooth Finish" or "Cedar Texture" | Vertical | O-2 | 4 877 mm (16 ft.) | 406 mm (16 in.) | 11.1 mm (7/16 in.) |
| LP® SmartSide® Vertical Siding | phenolic-resin-saturated primed overlay |
Manufacturing plants
This evaluation is limited to products produced at the following plants:
| Product names | Manufacturing plants | ||||||
|---|---|---|---|---|---|---|---|
| Dawson Creek, BC, CA | Hayward, WI, US | Houlton (New Limerick), ME, US | Newberry, MI, US | Swan Valley (Minitonas), MB, CA | Tomahawk, WI, US | Two Harbors, MN, US | |
| LP® SmartSide® ExpertFinish® Lap | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC |
| LP® SmartSide® ExpertFinish® Panel | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC |
| LP® SmartSide® ExpertFinish® Vertical Siding | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC |
| LP® SmartSide® Lap | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC |
| LP® SmartSide® Panel | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC |
| LP® SmartSide® Vertical Siding | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC | Product evaluated by the CCMC |
Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC
Technical information
This evaluation is based on demonstrated conformance with the following criteria:
| Criteria number | Criteria name |
|---|---|
| CSA O437.0-93, Grade O1 | Standards on OSB and Waferboard |
| CSA O437.0-93, Grade O2 | Standards on OSB and Waferboard |
Administrative information
Use of Canadian Construction Materials Centre (CCMC) assessments
This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).
It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.
Disclaimer
The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.
This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.
Language
Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.
Copyright
© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2023
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.
CCMC recognition
The Canadian Construction Materials Centre (CCMC) assesses compliance with Canadian building, energy and safety codes. We are the only construction code compliance service supported and operated by the Government of Canada. Trusted by over 6,000 regulators across Canada.
CCMC assessments are recognized by construction authorities across Canada:
| Alliance of Canadian Building Official Associations (ACBOA) |  |
| First Nations National Building Officers Association (FNNBOA) |  |
| Canadian Home Builders’ Association (CHBA) |  |
| Alberta Building Officials Association (ABOA) |  |
| Saskatchewan Building Officials Association (SBOA) |  |
| Manitoba Building Officials Association (MBOA) |  |
| Ontario Building Officials Association (OBOA) |  |
| New Brunswick Building Officials Association (NBBOA) |  |
| Nova Scotia Building Officials Association (NSBOA) |  |
The CCMC provides code compliance assessments to Canadian code requirements, consulting nationwide with construction regulators to elicit regional variations in code requirements as well as provincial and local interpretations. Users are advised to review the technical information presented in CCMC assessments when making approval decisions. Learn more about how the CCMC provides a unique service for Canada.
For more information, contact the CCMC by phone at (613) 993-6189 or by email at ccmc@nrc-cnrc.gc.ca
