[CCMC 14431-L] CCMC Standard compliance evaluation

CCMC number:

14431-L

Status:

Active

Issue date:

2022-01-25

Modified date:

2023-11-08

Evaluation holder:

Owens Corning Canada Inc.

3450 McNicoll Avenue
Scarborough ON M1V 1Z5
Canada
Website: owenscorning.ca/index.html
Telephone: 1-800-988-5269

Product name:

PROPINK COMFORTSEAL™ GUN FOAM

Criteria:

CAN/ULC-S710.1-11, Class 1, "Standard for Thermal Insulation – Bead-Applied One Component Polyurethane Air Sealant Foam, Part 1: Material Specification"

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product name

PROPINK COMFORTSEAL™ GUN FOAM

Product description

The product is a bead-applied one-component polyurethane expanding foam, which can be used as a sealant to control air leakage at penetrations (e.g., in window and door frames) within the DuPont™ Tyvek^® HomeWrap^® air barrier system. The product is packaged in pressurized containers, which are available in various sizes.

The durability of the products was assessed with the following substrates at the window/wall interface.

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product name	Manufacturing plant
Product name	Norton, OH, US
PROPINK COMFORTSEAL™ GUN FOAM	Product evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number	Criteria name
CAN/ULC-S710.1-11, Class 1	Standard for Thermal Insulation – Bead-Applied One Component Polyurethane Air Sealant Foam, Part 1: Material Specification

The durability of the product was assessed with the following substrates at the window/wall interface.

Air leakage rate after aging and time-to-occupancy specifications for the product

Product	Substrate qualification	Air leakge rate after aging (L/s⋅m²)^{Table footnote (1)}	Time to occupancy (h)^{Table footnote}
PROPINK COMFORTSEAL™ GUN FOAM	Wood window or door frame to DuPont Tyvek^® HomeWrap^®	Pass	25
PROPINK COMFORTSEAL™ GUN FOAM	Vinyl window or door frame to DuPont Tyvek® HomeWrap®	Pass	25

As per CAN/ULC-S710.1-11, the one-component air sealant foam must be installed in accordance with the manufacturer’s instructions and CAN/ULC-S710.2-11, “Standard for Thermal Insulation – Bead-Applied One Component Polyurethane Air Sealant Foam – Part 2: Installation.”

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.