Government of Canada / Gouvernement du Canada

Search

[CCMC 14026-R] CCMC Canadian code compliance evaluation

From: National Research Council Canada

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Compliance opinion

It is the opinion of the Canadian Construction Materials Centre that the evaluated product, when used as a waterproof membrane covering for decks and balconies subject to light pedestrian traffic in accordance with the conditions and limitations stated in this evaluation, complies with the following code:

National Building Code of Canada 2015

ID Code provision Solution type
09-26-00-00-00-0-009.26. RoofingAlternative

The above opinion(s) is/are based on the evaluation by the CCMC of technical evidence provided by the evaluation holder, and is bound by the stated conditions and limitations. For the benefit of the user, a summary of the technical information that forms the basis of this evaluation has been included.

Product information

Product name

Vinyl Decking Membrane

Product description

The product is a polyvinyl chloride membrane with a nominal thickness of 1.5 mm (nominal thickness of 2.0 mm with fleece backing). The product is made with a heat-set polyester fleece attached to the back-side of the membrane. The surface of the product is embossed to provide a textured finish. The membrane is available in rolls that are 1.8 m wide and 23 m long. The product can be cut to required lengths. The product is available in a variety of colours.

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product nameManufacturing plant
Mountain Top, PA, US
Vinyl Decking MembraneProduct evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Conditions and limitations

The CCMC’s compliance opinion is bound by this product being used in accordance with the conditions and limitations set out below.

  • The product must be used in conjunction with a continuous solid plywood or concrete substrate.
  • The membrane must be fully adhered to the substrate using the DURA PRO® – vinyl decking adhesive (AF0295), and applied as per the installation instructions.
  • The product is limited for use in areas that are subject to traffic loads generated by residential occupancies only (light pedestrian traffic).
  • The product must not be exposed to chemical attack or spillage. In situations where extended contact with chemicals or pollutants may occur, the suitability of the product must be determined.
  • Any physical or chemical damage to the membrane must be repaired in accordance with the manufacturer’s instructions.
  • The product is limited for use where the roof or deck surface has a minimum slope of 1:48.
  • The product must not be installed with butt seam joints.
  • Joints must be shingle-lapped in order to shed water.
  • The product must be installed by approved applicators only and in strict conformance with the current installation instructions.
  • The product or its packaging must be identified with the following information:
    • manufacturer’s name or logo; and
    • the phrase “CCMC 14026-R.”

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CCMC-TG-075419.01-15ACCMC Technical Guide for "PVC Sheet-Applied Waterproof Decking Membrane (Exposed to Light Pedestrian Traffic)"

The Report Holder has submitted technical documentation for CCMC’s evaluation. Testing was conducted at laboratories recognized by CCMC. The corresponding technical evidence for this product is summarized below.

Material requirements
Table 1. Results of testing the material properties of the product
Property Unit Requirement Result
Overall thickness mm Report value 1.63
Overall thickness with fleece backing mm Report value 2.04
Performance requirements
Table 2. Results of testing the performance properties of the product
Property Unit Requirement Result
Load strain properties –strain energy machine direction kN/m ≥ 30 54
cross-machine direction 50
Water vapor transmission g/m2/d ≤ 4.0 1.3
Water absorption mass % ≤ 3.0 2.9
Static puncture (rating) – ≥ 3.0 3
Dynamic puncture (rating) – ≥ 3.0 4
Low temperature impact orginal – 8 out of 10 pass 10 out of 10 pass
after weathering 10 out of 10 pass
Low temperature flexibility original

 

–

 Material must not crack or exhibit any visible defects Pass
after heat aging
after weathering
Lap joint strength – strain energy cross-machine direction original

%

 Min. 75% of original membrane 82 (41 kN/m)
after heat aging Min. 70% of original membrane 78 (39 kN/m)
Abrasion resistance – original  weight loss g ≤ 0.4 0.22
depth of water mm ≤ 0.3 0.18
Abraison resistance – after accelerated weathering weight loss g ≤ 4.0 0.35
depth of water mm ≤ 0.3 0.26
Adhesion to substrate DURA PRO® – vinyl decking adhesive (AF0295) N ≥ 125 302
Slip resistance – dry condition (rating) leather – ≥ 0.50 0.57
rubber ≥ 0.70 0.74
Slip resistance – wet condition (rating) leather – ≥ 0.60 0.60
rubber ≥ 0.65 0.89

 

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2023

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.

CCMC recognition

The Canadian Construction Materials Centre (CCMC) assesses compliance with Canadian building, energy and safety codes. We are the only construction code compliance service supported and operated by the Government of Canada. Trusted by over 6,000 regulators across Canada.

Most Canadian authorities having jurisdiction (AHJs) consider CCMC product assessments acceptable as evidence for product approval.

CCMC assessments are recognized by construction authorities across Canada:

The CCMC provides code compliance assessments to Canadian code requirements, consulting nationwide with construction regulators to elicit regional variations in code requirements as well as provincial and local interpretations. Users are advised to review the technical information presented in CCMC assessments when making approval decisions. Learn more about how the CCMC provides a unique service for Canada.

For more information, contact the CCMC by phone at (613) 993-6189 or by email at ccmc@nrc-cnrc.gc.ca

NOTICE

The information presented on this webpage (in HTML format) is the most up-to-date information available from the CCMC about this assessment.

By downloading this PDF you acknowledge that:

  • this PDF is intended for record-keeping purposes only,
  • it represents the information as it was available at the time of downloading, and
  • it may not reflect the latest available information at some future date.
References to this CCMC assessment (in product literature, on websites, etc.) must be made by linking to the evaluation webpage. This PDF must not be used as a means of distributing this assessment to an audience.

View PDF

Code compliance as an acceptable solution

Code Compliance via Acceptable Solutions

If a building design (e.g. material, component, assembly or system) can be shown to meet all provisions of the applicable acceptable solutions in Division B (e.g. it complies with the applicable provisions of a referenced standard), it is deemed to have satisfied the objectives and functional statements linked to those provisions and thus to have complied with that part of the Code.

National Building Code of Canada, Sentence A-1.2.1.1.(1)(a)

The CCMC has determined that compliance with this provision of the Code has been demonstrated as an Acceptable Solution. The evaluation report provides a summary of the basis of CCMC's compliance opinion.

CCMC's code compliance opinions

All CCMC evaluation reports are opinions of code compliance established in accordance with the National Building Code of Canada, Subsection 1.2.1. "Compliance with this Code," which requires compliance to be achieved by:

  • complying with the applicable acceptable solutions in Division B, or
  • using an alternative solution that will achieve at least the minimum level of performance required by Division B in the areas defined by the objective and functional statements attributed to the applicable acceptable solutions.

The CCMC assesses compliance with Canadian building, energy and safety codes, and is trusted by over 6,000 regulators across Canada.

Code compliance as an alternative solution

Code Compliance via Alternative Solutions

Where a design differs from the acceptable solutions in Division B, then it should be treated as an "alternative solution." A proponent of an alternative solution must demonstrate that the alternative solution addresses the same issues as the applicable acceptable solutions in Division B and their attributed objectives and functional statements. However, because the objectives and functional statements are entirely qualitative, demonstrating compliance with them in isolation is not possible. Therefore, Clause 1.2.1.1.(1)(b) identifies the principle that Division B establishes the quantitative performance targets that alternative solutions must meet. In many cases, these targets are not defined very precisely by the acceptable solutions [...] Nevertheless, Clause 1.2.1.1.(1)(b) makes it clear that an effort must be made to demonstrate that an alternative solution will perform as well as a design that would satisfy the applicable acceptable solutions in Division B—not “well enough” but “as well as.”

National Building Code of Canada, Sentence A-1.2.1.1.(1)(b)

The CCMC has determined that compliance with this provision of the Code has been demonstrated as an Alternative Solution. The evaluation report provides a summary of the basis of CCMC's compliance opinion.

CCMC's code compliance opinions

All CCMC evaluation reports are opinions of code compliance established in accordance with the National Building Code of Canada, Subsection 1.2.1. "Compliance with this Code," which requires compliance to be achieved by:

  • complying with the applicable acceptable solutions in Division B, or
  • using an alternative solution that will achieve at least the minimum level of performance required by Division B in the areas defined by the objective and functional statements attributed to the applicable acceptable solutions.

The CCMC assesses compliance with Canadian building, energy and safety codes, and is trusted by over 6,000 regulators across Canada.

Report a problem on this page
Date modified: