Language selection

Search


[CCMC 13638-L] CCMC Standard compliance evaluation

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

  • ISOLOFOAM 250
  • ISOLOFOAM HD30
  • ISOLOFOAM HD40
  • ISOLOFOAM Type 3
  • ISOLOFOAM XHD 250
  • ISOLOFOAM XHD 300
  • ISOLOFOAM XHD 400
  • ISOLOFOAM XHD 600
  • ISORAD V2 250
  • ISORAD V2 300
  • ISORAD V2 300 R3-R5
  • iFLEXFOAM 200
  • iFLEXFOAM 300

Product description

The products are rigid thermal insulation panels made of Type 3 expanded/moulded polystyrene (EPS).

Table 1. Product descriptions
Product Description
ISOLOFOAM Type 3 Type 3 rigid insulation panel made of expanded/moulded polystyrene
iFLEXFOAM 200 Type 3 rigid insulation panel made of expanded/moulded polystyrene with a laminated polypropylene membrane on each side and integrating the ISOCLICK clipping system
iFLEXFOAM 300 Type 3 rigid insulation panel made of expanded/moulded polystyrene with a laminated polypropylene membrane on each side and integrating the ISOCLICK clipping system
ISOLOFOAM HD30 Type 3 rigid insulation panel made of expanded/moulded polystyrene
ISOLOFOAM HD40 Type 3 rigid insulation panel made of expanded/moulded polystyrene
ISORAD V2 250 Type 3 rigid insulation panel made of expanded/moulded polystyrene for radiant floor heating with a multidirectional tube retaining design and ISOCLICK ALIGN clipping system on four sides
ISORAD V2 300 Type 3 rigid insulation panel made of expanded/moulded polystyrene for radiant floor heating with a multidirectional tube retaining design and ISOCLICK ALIGN clipping system on four sides
ISORAD V2 300 R3-R5 Type 3 rigid insulation panel made of expanded/moulded polystyrene for radiant floor heating with a multidirectional tube retaining design and ISOCLICK ALIGN clipping system on four sides
ISOLOFOAM 250 Type 3 rigid insulation panel made of expanded/moulded polystyrene
ISOLOFOAM XHD 250 Type 3 rigid insulation panel made of expanded/moulded polystyrene
ISOLOFOAM XHD 300 Type 3 rigid insulation panel made of expanded/moulded polystyrene
ISOLOFOAM XHD 400 Type 3 rigid insulation panel made of expanded/moulded polystyrene
ISOLOFOAM XHD 600 Type 3 rigid insulation panel made of expanded/moulded polystyrene

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product namesManufacturing plant
Sainte-Marie-de Beauce, QC, CA
ISOLOFOAM 250Product evaluated by the CCMC
ISOLOFOAM HD30Product evaluated by the CCMC
ISOLOFOAM HD40Product evaluated by the CCMC
ISOLOFOAM Type 3Product evaluated by the CCMC
ISOLOFOAM XHD 250Product evaluated by the CCMC
ISOLOFOAM XHD 300Product evaluated by the CCMC
ISOLOFOAM XHD 400Product evaluated by the CCMC
ISOLOFOAM XHD 600Product evaluated by the CCMC
ISORAD V2 250Product evaluated by the CCMC
ISORAD V2 300Product evaluated by the CCMC
ISORAD V2 300 R3-R5Product evaluated by the CCMC
iFLEXFOAM 200Product evaluated by the CCMC
iFLEXFOAM 300Product evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CAN/ULC-S701.1:2017, Type 3Standard for Thermal Insulation, Polystyrene Boards

The evaluation of these products is based solely on its certification and listing by Intertek Testing Services NA Ltd to CAN/ULC-S701-05, CAN/ULC-S701-11 and CAN/ULC-S701.1-17.

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2024

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.

Page details

From: National Research Council Canada

Date modified: