[CCMC 13460-L] CCMC Standard compliance evaluation

CCMC number:

13460-L

Status:

Active

Issue date:

2011-10-20

Modified date:

2024-07-30

Evaluation holder:

Hunter Panels LLC

15 Franklin Street
Portland ME 04101
United States
Website: www.hunterpanels.com
Telephone: 888-746-1114
Email: info@hpanels.com

Product names:

H-Shield
H-Shield CG
Xci 286
Xci CG
Xci CG Class A
Xci Class A
Xci Foil
Xci Foil Class A

Criteria:

CAN/ULC-S704-11, Type 2, Class 1, "Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced"
CAN/ULC-S704-11, Type 2, Class 2, "Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced"
CAN/ULC-S704-11, Type 3, Class 1, "Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced"
CAN/ULC-S704-11, Type 3, Class 2, "Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced"

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

H-Shield
H-Shield CG
Xci 286
Xci CG
Xci CG Class A
Xci Class A
Xci Foil
Xci Foil Class A

Product description

Table 1. Description of products and facer materials
Product name	Product description
H-Shield	Rigid board, polyisocyanurate thermal insulation covered with a fibre-reinforced facer on both sides
H-Shield CG	Rigid board, polyisocyanurate thermal insulation covered with coated glass facers on both sides
Xci CG
Xci CG Class A
Xci Foil	Rigid board, polyisocyanurate thermal insulation covered with foil facers on both sides
Xci Class A
Xci Foil Class A
Xci 286

The products are manufactured in panels that are 1 220 mm × 1 220 mm and 1 220 mm × 2 440 mm, in thicknesses ranging from 25 mm to 114 mm.

Manufacturing plants

This evaluation is limited to products produced at the following plants:

Product names	Manufacturing plants
Product names	Franklin Park, IL, US	Montgomery, NY, US	Puyallup, WA, US	Tooele, UT, US
H-Shield	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC
H-Shield CG	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	-
Xci 286	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	-
Xci CG	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	-
Xci CG Class A	-	Product evaluated by the CCMC	Product evaluated by the CCMC	-
Xci Class A	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	-
Xci Foil	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC
Xci Foil Class A	Product evaluated by the CCMC	Product evaluated by the CCMC	Product evaluated by the CCMC	-

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number	Criteria name
CAN/ULC-S704-11, Type 2, Class 1	Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced
CAN/ULC-S704-11, Type 2, Class 2	Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced
CAN/ULC-S704-11, Type 3, Class 1	Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced
CAN/ULC-S704-11, Type 3, Class 2	Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced

The information below is provided for use by design professionals and is based on data submitted to the CCMC as part of the evaluation.

Table 2. Classification, design long-term thermal resistance (LTTR) and water vapour permeance (WVP) specifications
Product name	Classification	Design LTTR (m²·°C/W)⁽¹⁾			WVP (ng/(Pa·s·m²))^{Table footnote (2)}
Product name	Classification	25 mm thick	50 mm thick	75 mm thick	25.4 mm thick
H-Shield	Type 2, Class 2	0.94	1.88	2.87	58.6^{Table footnote (3)}
H-Shield CG and Xci CG	Type 2, Class 2	0.94	1.85	2.79	56.4^{Table footnote (4)}
Xci Foil	Type 2, Class 1	1.03	1.98	2.98	0.72
Xci Class A, Xci Foil Class A and Xci 286	Type 3, Class 1	0.93	1.85	2.91	0.11
Xci CG Class A	Type 3, Class 2	0.92	1.81	2.74	56.1^{Table footnote (5)}

Notes:

Footnote 1

Contact the manufacturer for LTTR data on thicknesses not specified in this evaluation. Design LTTR values presented are for the lowest value observed at all manufacturing plants. Design LTTR values may vary slightly for each product from one plant to another. The laboratory determining compliance with this standard has established that all plants are producing compliant products.

Return to table footnote 1 referrer

Footnote 2

Values are based on the average test results obtained from all the manufacturing plants producing the identified product name. The laboratory determining compliance with this standard has established that all plants are producing compliant products.

Return to table footnote 2 referrer

Footnote 3

The results obtained from the four plants producing this product vary from 54.9 to 63.5 ng/(Pa·s·m²).

Return to table footnote 3 referrer

Footnote 4

The results obtained from the three plants producing these products vary from 53.8 to 67.5 ng/(Pa·s·m²).

Return to table footnote 4 referrer

Footnote 5

The results obtained from the two plants producing this product vary from 50.9 to 61.2 ng/(Pa·s·m²).

Return to table footnote 5 referrer

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.