[CCMC 13455-L] CCMC Standard compliance evaluation

CCMC number:

13455-L

Status:

Active

Issue date:

2009-12-07

Modified date:

2024-04-04

Evaluation holder:

ICP Construction Inc.

150 Dascomb Road
Andover MA 01810
United States
Website: www.icpgroup.com
Telephone: 330-753-4585, Ext. 1113

Product names:

HandiFoam^® E84 HFO
HandiFoam^® HFO FR

Criteria:

CAN/ULC-S711.1-11, Class 1, "Standard for Thermal Insulation – Bead-Applied Two Component Polyurethane Air Sealant Foam, Part 1: Material Specification"
CAN/ULC-S711.1:2019, "Standard for Bead-Applied Two Component Polyurethane Air Sealant Foam, Part 1: Material Specification"

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

HandiFoam^® E84 HFO
HandiFoam^® HFO FR

Product description

The products are bead-applied, two-component, low-pressure polyurethane foams used as air sealants for building applications. The products are packaged in pressurized containers and are available in various sizes.

Manufacturing plant

This evaluation is valid only for products produced at the following plant:

Product names	Manufacturing plant
Product names	Tomball, TX, US
HandiFoam^® E84 HFO	Product evaluated by the CCMC
HandiFoam^® HFO FR	Product evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number	Criteria name
CAN/ULC-S711.1-11, Class 1	Standard for Thermal Insulation – Bead-Applied Two Component Polyurethane Air Sealant Foam, Part 1: Material Specification
CAN/ULC-S711.1:2019	Standard for Bead-Applied Two Component Polyurethane Air Sealant Foam, Part 1: Material Specification

Table 1. Product complying to standard edition
Product	CAN/ULC-S711.1-11	CAN/ULC-S711.1:2019
HandiFoam^® E84 HFO	Product evaluated by the CCMC
HandiFoam^® HFO FR		Product evaluated by the CCMC

Table 2. Air leakage rate after aging and time-to-occupancy specifications for the product
Product	Substrate qualification	Air leakage rate after aging^{Table 2 footnote (1)} (L/s·m)	Time to occupancy (h)
HandiFoam^® HFO FR	Wood window to Tyvek^® HomeWrap^®	0.033	25
HandiFoam^® HFO FR	Vinyl window to Tyvek^® HomeWrap^®	0.025	25
HandiFoam^® E84 HFO	Wood window to Tyvek^® HomeWrap^® and DuPont™ FlexWrap™ NF	0.004	25
HandiFoam^® E84 HFO	Vinyl window to Tyvek^® HomeWrap^® and DuPont™ FlexWrap™ NF	0.016	25

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.