Language selection

Search


[CCMC 13431-L] CCMC Standard compliance evaluation

In most jurisdictions this document is sufficient evidence for approval by Canadian authorities.

Learn more about CCMC recognition Look for the trusted CCMC mark on products to verify compliance.

Product information

Product names

  • FOAMULAR® C-200
  • FOAMULAR® Cel-Lok®
  • FOAMULAR® CodeBord®
  • FOAMULAR® Gridboard
  • FOAMULAR® Half-Inch
  • FOAMULAR® NGX™ C-200
  • FOAMULAR® NGX™ Cel-Lok®
  • FOAMULAR® NGX™ CodeBord®
  • FOAMULAR® NGX™ Gridboard
  • FOAMULAR® NGX™ Half-Inch

Product description

The products are pink-coloured, extruded polystyrene, rigid foam board thermal insulation.

The product is available in the dimensions available in the table below.

Table 1. Production dimensions
Product name Length (mm) Width (mm) Thicknesses (mm) Product geometry
FOAMULAR® C-200 2 438 610 25, 38, 51, 64, 76, 89,102 Solid foam with shiplap or butted edges
FOAMULAR® NGX™ C-200
FOAMULAR® Gridboard 2 438 1 220 51, 64, 76, 89, 102 Solid foam with shiplap or butted edges
FOAMULAR® NGX™ Gridboard
FOAMULAR® Cel-Lok® 2 438 610 25, 38, 51, 64, 76, 89, 102 Longitudinal grooves to accommodate metal channels to which the interior finish can be attached
FOAMULAR® NGX™ Cel-Lok®
FOAMULAR® CodeBord® 2 438

610,

1 220

20, 25, 38, 51, 64, 76, 89 Solid foam with shiplap edges
FOAMULAR® NGX™ CodeBord®
FOAMULAR® Half-Inch 2 438 610 13 Solid foam with butted edges
FOAMULAR® NGX™ Half-Inch

 

Manufacturing plants

This evaluation is limited to products produced at the following plants:

Product namesManufacturing plants
Grande-Île (Valleyfield), QC, CAPortland, OR, USRockford, IL, USTallmadge, OH, US
FOAMULAR® C-200Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
FOAMULAR® Cel-Lok®Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
FOAMULAR® CodeBord®Product evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
FOAMULAR® GridboardProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
FOAMULAR® Half-InchProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMCProduct evaluated by the CCMC
FOAMULAR® NGX™ C-200Product evaluated by the CCMCProduct evaluated by the CCMC-Product evaluated by the CCMC
FOAMULAR® NGX™ Cel-Lok®Product evaluated by the CCMCProduct evaluated by the CCMC-Product evaluated by the CCMC
FOAMULAR® NGX™ CodeBord®Product evaluated by the CCMCProduct evaluated by the CCMC-Product evaluated by the CCMC
FOAMULAR® NGX™ GridboardProduct evaluated by the CCMCProduct evaluated by the CCMC-Product evaluated by the CCMC
FOAMULAR® NGX™ Half-InchProduct evaluated by the CCMCProduct evaluated by the CCMC-Product evaluated by the CCMC

Product evaluated by the CCMC Indicates that the product from this manufacturing facility has been evaluated by the CCMC

  Technical information

This evaluation is based on demonstrated conformance with the following criteria:

Evaluation requirements
Criteria number Criteria name
CAN/ULC-S701.1:2017, Type 3Standard for Thermal Insulation, Polystyrene Boards

The following table provides the standard classification, design long term thermal resistance (LTTR), and water vapor permeance (WVP) for the products. 

Table 2. Classification, design LTTR, and WVP specifications for the products
Product name Classification Deisgn LTTR (m2·°C/W)Table footnote (1) WVP (ng/(Pa∙s∙m2))
Thickness Thickness
25 mm 50 mm 75 mm 25 mm
FOAMULAR® NGX™ C-200Table footnote (2) Type 3 0.85 1.65 2.47 37
FOAMULAR® NGX™ Cel-Lok®Table footnote (2)
FOAMULAR® NGX™ CodeBord®Table footnote (2)
FOAMULAR® NGX™ GridboardTable footnote (2)
FOAMULAR® NGX™ Half-InchTable footnote (2)
FOAMULAR® C-200 Type 3 0.85 1.69 2.55 60
FOAMULAR® Cel-Lok®
FOAMULAR® CodeBord®
FOAMULAR® Gridboard
FOAMULAR® Half-Inch

Administrative information

Use of Canadian Construction Materials Centre (CCMC) assessments

This assessment must be read in the context of the entire CCMC Registry of Product Assessments, any applicable building code or by-law requirements, and/or any other regulatory requirements (for example, the Canada Consumer Product Safety Act, the Canadian Environmental Protection Act, etc.).

It is the responsibility of the user to confirm that the assessment they are using is current and has not been withdrawn or superseded by a later version on the CCMC Registry of Product Assessments.

Disclaimer

The National Research Council of Canada (NRC) has evaluated only the characteristics of the specific product described herein. The information and opinions in this evaluation are directed to those who have the appropriate degree of experience to use and apply its contents (such as authorities having jurisdiction, design professionals and specifiers). This evaluation is valid when the product is used as part of permitted construction, respecting all conditions and limitations stated in the evaluation, and in accordance with applicable building codes and by-laws.

This evaluation is provided without representation, warranty or guarantee of any kind, expressed or implied, and the NRC provides no endorsement for any evaluated product. The NRC accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained herein or the use of any evaluated product. The NRC is not undertaking to render professional or other services on behalf of any person or entity nor to perform any duty owed by any person or entity to another person or entity.

Language

Une version française de ce document est disponible.
In the case of any discrepancy between the English and French version of this document, the English version shall prevail.

Copyright

© His Majesty the King in Right of Canada, as represented by the National Research Council of Canada, 2023

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the CCMC.

Page details

From: National Research Council Canada

Date modified: