219B Boulevard René-A. Robert
Sainte-Thérèse, Quebec J7E 4L1
Canada
- All interested parties
- Some calibration services are available on-site. These services are indicated in the "Remarks" column of the following pages.
- Mass
- Volume
- Standards Council of Canada (SCC)
- SCC file number: 151263
- First issued 2021-12-21
- Issue 1.1e 2023-10-15
This CLAS Certificate is published by the CLAS service of the National Research Council of Canada (NRC) in cooperation with the laboratory accreditation program of the accreditation body.
The accreditation body recognizes the capability of the named laboratory for being able to perform calibrations as per the listed Calibration and Measurement Capabilities with metrological traceability to the International System of Units (SI) or to standards acceptable to CLAS.
See supplementary notes.
On this page
- Mass – table 1
- Mass – table 2
- Balances (Electronic, non-automatic) - table 1
- Balances (Electronic, non-automatic) – table 2
- Piston Pipette – table 1
- Piston Pipette – table 2
Mass – table 1
One to one comparison. For the calibration of masses with traceability to the International System of Units (SI) through the primary standards of NRC and of Measurement Canada (MR-1). Calibration results are reported in terms of conventional mass as defined by the Organisation internationale de métrologie légale (OIML):
"The conventional value of the value of the result of weighing a body in air is equal to mass of a standard, of conventionally chosen density (8000 kg/m3), at a conventionally chosen temperature (20 °C), which balances this body at this reference temperature in air of conventionally chosen density (1.2 kg/m3)."
The Calibration Measurement Capability listed relates to measurements on integral conventional standard weights. It can be achieved only if the weights being calibrated are suitable for such a measurement. Calibrations can be given in other units as required. Procedure: I-MA-003
This service is not available on-site.
Measured Quantity & Range or Instrument | Expanded Measurement Uncertainty | Type of service |
---|---|---|
25 kg | 30 mg | I |
20 kg | 20 mg | I |
10 kg | 10 mg | I |
5 kg | 2.5 mg | I |
3 kg | 2.4 mg | I |
2 kg | 1.5 mg | I |
1 kg | 0.5 mg | I |
500 g | 0.24 mg | I |
300 g | 0.15 mg | I |
200 g | 0.10 mg | I |
100 g | 0.080 mg | I |
50 g | 0.040 mg | I |
30 g | 0.040 mg | I |
20 g | 0.030 mg | I |
10 g | 0.017 mg | I |
5 g | 0.010 mg | I |
3 g | 0.008 mg | I |
2 g | 0.007 mg | I |
1 g | 0.007 mg | I |
500 mg | 0.004 mg | I |
300 mg | 0.003 mg | I |
200 mg | 0.002 mg | I |
100 mg | 0.002 mg | I |
50 mg | 0.002 mg | I |
30 mg | 0.002 mg | I |
20 mg | 0.002 mg | I |
10 mg | 0.002 mg | I |
5 mg | 0.002 mg | I |
3 mg | 0.002 mg | I |
2 mg | 0.002 mg | I |
1 mg | 0.002 mg | I |
Mass – table 2
One to One comparison. Procedure: I-MA-003
On-site calibration available.
Measured Quantity & Range or Instrument | Expanded Measurement Uncertainty | Type of service |
---|---|---|
10 kg | 40 mg | I |
20 kg | 60 mg | I |
25 kg | 70 mg | I |
Balances (Electronic, non-automatic) - table 1
For the calibration of balances. The Calibration Measurement Capability listed can be achieved only if the balances being calibrated are suitable for such a measurement. The Calibration Measurement Capability is based upon the use of ASTM Class 1 reference weights. Procedure: I-MA-008
This service is available on-site.
Measured Quantity | Range or Instrument | Expanded Measurement Uncertainty | Type of service |
---|---|---|---|
0.0001 mg resolution | 0 g to 6 g | 0.0035 mg | II |
0.001 mg resolution | 0 g to 52 g | 0.0037 mg | II |
0.01 mg resolution | 0 g to 220 g | 0.015 mg | II |
0.1 mg resolution | 0 g to 2100 g | 0.12 mg | II |
1 mg resolution | 0 g to 26100 g | 1.2 mg | II |
2 mg resolution | 0 g to 30000 g | 2.5 mg | II |
5 mg resolution | 0 g to 30000 g | 6 mg | II |
10 mg resolution | 0 g to 52100 g | 12 mg | II |
100 mg resolution | 0 g to 60000 g | 120 mg | II |
Balances (Electronic, non-automatic) – table 2
For the calibration of balances. The Calibration Measurement Capability listed can be achieved only if the balances being calibrated are suitable for such a measurement. The Calibration Measurement Capability is based upon the use of ASTM Class 4 (or better class) reference weights. Procedure: I-MA-008
This service is available on-site.
Measured Quantity | Range or Instrument | Expanded Measurement Uncertainty | Type of service |
---|---|---|---|
1 g resolution | 0 g to 60000 g | 1.2 g | II |
2 g resolution | 0 g to 300 000 g | 2.5 g | II |
5 g resolution | 0 g to 300 000 g | 6 g | II |
10 g resolution | 0 g to 300 000 g | 12 g | II |
100 g resolution | 0 g to 300 000 g | 120 g | II |
1 kg resolution | 0 g to 300 000 g | 1.2 kg | II |
Piston Pipette – table 1
For the calibration of single channel piston pipettes and multi-channel piston pipettes using only one channel at a time in accordance with the laboratory's calibration procedure I-MA-010.
This calibration service is available on-site.
Measured Quantity & Range or Instrument | Expanded Measurement Uncertainty | Type of service |
---|---|---|
0.1 µL to 2 µL | 0.015 µL | II |
> 2 µL to 5 µL | 0.015 µL | II |
> 5 µL to 10 µL | 0.017 µL | II |
> 10 µL to 20 µL | 0.029 µL | II |
> 20 µL to 30 µL | 0.043 µL | II |
> 30 µL to 40 µL | 0.056 µL | II |
> 40 µL to 50 µL | 0.070 µL | II |
> 50 µL to 100 µL | 0.14 µL | II |
> 100 µL to 120 µL | 0.17 µL | II |
>120 µL to 150 µL | 0.21 µL | II |
>150 µL to 200 µL | 0.28 µL | II |
> 200 µL to 300 µL | 0.42 µL | II |
> 300 µL to 500 µL | 0.69 µL | II |
> 500 µL to 600 µL | 0.83 µL | II |
> 600 µL to 1000 µL | 1.4 µL | II |
> 1000 µL to 1200 µL | 1.7 µL | II |
> 1200 µL to 2000 µL | 2.8 µL | II |
> 2000 µL to 2500 µL | 3.5 µL | II |
> 2500 µL to 5000 µL | 6.9 µL | II |
> 5000 µL to 10000 µL | 14 µL | II |
Piston Pipette – table 2
For the calibration of multi-channel piston pipettes using up to four channel at a time in accordance with the laboratory's calibration procedure I-MA-010.
This calibration service is available on-site.
Measured Quantity & Range or Instrument | Expanded Measurement Quality | Type of Service |
---|---|---|
2 µL to 10 µL | 0.095 µL | II |
> 10 µL to 20 µL | 0.098 µL | II |
> 20 µL to 30 µL | 0.10 µL | II |
> 30 µL to 40 µL | 0.11 µL | II |
> 40 µL to 50 µL | 0.12 µL | II |
> 50 µL to 100 µL | 0.17 µL | II |
> 100 µL to 120 µL | 0.19 µL | II |
> 120 µL to 150 µL | 0.23 µL | II |
> 150 µL to 200 µL | 0.29 µL | II |
> 200 µL to 300 µL | 0.43 µL | II |
> 300 µL to 500 µL | 0.70 µL | II |
> 500 µL to 600 µL | 0.84 µL | II |
> 600 µL to 1000 µL | 1.4 µL | II |
> 1000 µL to 1200 µL | 1.7 µL | II |