| Company name | SEP Métrologie |
|---|---|
| Company address | 617 rue Simonds Sud Granby, Quebec, J2J 1C1 Canada |
| Contact | Érick Rainville Telephone: (450) 776-3286 Email: erainville@sepmetrologie.com |
| Clients served |
|
| Fields of calibration | |
| Accreditation body |
|
| ISO/IEC 17025 |
|
This CLAS Certificate is published by the CLAS service of the National Research Council of Canada (NRC) in cooperation with the laboratory accreditation program of the accreditation body. The accreditation body recognizes the capability of the named laboratory for being able to perform calibrations as per the listed Calibration and Measurement Capabilities with metrological traceability to the International System of Units (SI) or to standards acceptable to CLAS. See supplementary notes.
Dimensional
Type I Capability
| Measured Quantity & Range or Instrument | Expanded Measurement Uncertainty | Remarks |
|---|---|---|
| Gauge block, length: Steel, Rectangular and Square | ||
| Inch, up to 4 inches | (4.56 + 2.53L) µinch (Note: L in 'inches') |
For the calibration of gauge block. SEP Métrologie calibration procedure IE 004. |
| Inch, >4 to 12 inches | (4.22 + 3.60L) µinch (Note: L in 'inches') |
|
| Metric, up to 100 millimeters | (0.12+ 0.003L) µm (Note: L in 'millimeters') |
|
| Metric, >100 to 300 millimeters | (0.11 + 0.004L) µm (Note: L in 'millimeters') | |
| Cylindrical ring gauge, diameter | ||
| Inch, 0.04 to 1 inches | 21 µpouce | For the calibration of cylindrical ring gauge. SEP Métrologie calibration procedure IE 008. |
| Inch, >1 to 6 inches | (19.83 + 3D) µinch (Note: D en 'inches') |
|
| Metric, 0 to 25 millimeters | 0.53 µm | |
| Metric, >25 to 150 millimeters | (0.5 + 0.003D) µm (Note: D in 'millimeters') |
|
| Cylindrical plug gauge, diameter | ||
| Inch, up to 4 inches | (6.83 + 2.77D) µinch (Note: D in 'inches') |
For the calibration of cylindrical plug gauge. SEP Métrologie calibration procedure IE 005. |
| Metric, up to 100 millimeters | (0.17 + 0.003D) µm (Note: D in 'millimeters') |
|
Type II Capability
| Measured Quantity & Range or Instrument | Expanded Measurement Uncertainty | Remarks |
|---|---|---|
| 60 degree thread plug gauge and adjustable thread plug gauge: Pitch diameter (measured over thread wires) | ||
| Inch, up to 4 inches | 180 µinch | For the calibration of thread and adjustable plug gauge. SEP Métrologie calibration procedure IE 009. |
| Metric, up to 100 millimeters | 4.6 µm | |
| 60 degree thread plug gauge and adjustable thread plug gauge: Major diameter | ||
| Inch, up to 4 inches | (3.19 + 7.34L) µinch (Note: L in 'inches') |
For the calibration of thread and adjustable thread plug gauge. SEP Métrologie calibration procedure IE 009. |
| Metric, up to 100 millimeters | (0.08 + 0.007L) µm (Note: L in 'millimeters') |
|
| Indicator, Analog: | ||
| Inch, 0.001 inch graduation | 120 µinch | For the calibration of indicators. SEP Métrologie calibration procedure IE 006 and IE 007. |
| Inch, 0.0005 inch graduation | 61 µinch | |
| Inch, 0.0001 inch graduation | 23 µinch | |
| Metric, 0.01 mm graduation | 3.1 µm | |
| Metric, 0.002 mm graduation | 1.6 µm | |
| Metric, 0.001 mm graduation | 0.6 µm | |
| Inch, 0.001 inch graduation | 240 µinch |
For the calibration of indicators. SEP Métrologie calibration procedure IE‑006 and IE‑007. On-site calibration available. |
| Inch, 0.0005 inch graduation | 120 µinch | |
| Inch, 0.0001 inch graduation | 40 µinch | |
| Metric, 0.01 mm graduation | 6.1 µm | |
| Metric, 0.002 mm graduation | 3.1 µm | |
| Metric, 0.001 mm graduation | 1.0 µm | |
| Indicator, Digital: | ||
| Inch, 0.00005 inch resolution | 35 µinch | For the calibration of indicators. SEP Métrologie calibration procedure IE‑006 and IE‑007. |
| Inch, 0.0005 inch resolution | 290 µinch | |
| Metric, 0.001 mm resolution | 0.9 µm | |
| Metric, 0.01 mm resolution | 7.4 µm | |
| Inch, 0.00005 inch resolution | 67 µinch |
For the calibration of indicators. SEP Métrologie calibration procedure IE‑006 and IE‑007. On-site calibration available. |
| Inch, 0.0005 inch resolution | 580 µinch | |
| Metric, 0.001 mm resolution | 1.7 µm | |
| Metric, 0.01 mm resolution | 14.7 µm | |
| Height Gauge | ||
| Inch, up to 24 inches | (56.3 + 1.7L) µinch (Note: L in 'inches') |
For the calibration of height gauges. SEP Métrologie calibration procedure IE‑013. |
| Metric, up to 600 millimeters | (1.43 + 0.002L) µm (Note: L in 'millimeters') |
|
| Micrometers: Outside | ||
| Inch, 0.001 inch resolution, up to 24 inches | (579.57 + 0.43L) µinch (Note: L in 'inches') |
For the calibration of outside micrometers. SEP Métrologie calibration procedure IE‑001. |
| Metric, 0.02 mm resolution, up to 600 millimeters | (14.72 + 0.0004L) µm (Note: L in 'millimeters') |
|
| Inch, 0.001 inch resolution, up to 24 inches | (579.57 + 0.43L) µinch (Note: L in 'inches') |
For the calibration of outside micrometers. SEP Métrologie calibration procedure IE‑001. On-site calibration available. |
| Metric, 0.02 mm resolution, up to 600 millimeters | (14.72 + 0.0004L) µm (Note: L in 'millimeters') |
|
| Inch, 0.0001 inch resolution, up to 24 inches | (55.91 + 3.09L) µinch (Note: L in 'inches') |
For the calibration of outside micrometers. SEP Métrologie calibration procedure IE‑001. |
| Metric, 0.002 mm resolution, up to 600 millimeters | (1.42 + 0.003L) µm (Note: L in 'millimeters') |
|
| Inch, 0.0001 inch resolution, up to 24 inches | (55.91 + 3.09L) µinch (Note: L in 'inches') |
For the calibration of outside micrometers. SEP Métrologie calibration procedure IE‑001. On-site calibration available. |
| Metric, 0.002 mm resolution, up to 600 millimeters | (1.42 + 0.003L) µm (Note: L in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 24 inches | (20.40 + 3.88L) µinch (Note: L in 'inches') |
For the calibration of outside micrometers. SEP Métrologie calibration procedure IE‑001. |
| Metric, 0.001 mm resolution, up to 600 millimeters | (0.52 + 0.004L) µm (Note: L in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 24 inches | (20.40 + 3.88L) µinch (Note: L in 'inches') |
For the calibration of outside micrometers. SEP Métrologie calibration procedure IE‑001. On-site calibration available. |
| Metric, 0.001 mm resolution, up to 600 millimeters | (0.52 + 0.004L) µm (Note: L in 'millimeters') |
|
| Micrometer: Depth | ||
| Inch, 0.001 inch resolution, up to 12 inches | 580 µinch | For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑003. |
| Metric, 0.02 mm resolution, up to 300 millimeters | 14.73 µm | |
| Inch, 0.001 inch resolution, up to 12 inches | 580 µinch |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑003. On-site calibration available. |
| Metric, 0.02 mm resolution, up to 300 millimeters | 14.73 µm | |
| Inch, 0.0005 inch resolution, up to 12 inches | 300 µinch | For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑003. |
| Metric, 0.01 mm resolution, up to 300 millimeters | 7.62 µm | |
| Inch, 0.0005 inch resolution, up to 12 inches | 300 µinch |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑003. On-site calibration available. |
| Metric, 0.01 mm resolution, up to 300 millimeters | 7.62 µm | |
| Inch, 0.00005 inch resolution, up to 12 inches | (24.08 + 2.31L) µinch (Note: L in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑003. |
| Metric, 0.001 mm resolution, up to 300 millimeters | (0.61 + 0.059L) µm (Note: L in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 12 inches | (24.08 + 2.31L) µinch (Note: L in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑003. On-site calibration available. |
| Metric, 0.001 mm resolution, up to 300 millimeters | (0.61 + 0.059L) µm (Note: L in 'millimeters') |
|
| Micrometer: Inside – 2 touch | ||
| Inch, 0.001 inch resolution, up to 12 inches | 580 µinch | For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. |
| Metric, 0.02 mm resolution, up to 300 millimeters | 14.73 µm | |
| Inch, 0.001 inch resolution, up to 12 inches | 580 µinch |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. On-site calibration available. |
| Metric, 0.02 mm resolution, up to 300 millimeters | 14.73 µm | |
| Inch, 0.0001 inch resolution, up to 12 inches | (56.04 + 1.22L) µinch (Note: L in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. |
| Metric, 0.002 mm resolution, up to 300 millimeters | (1.42 + 0.03L) µm (Note: L in 'millimeters') |
|
| Inch, 0.0001 inch resolution, up to 12 inches | (56.04 + 1.22L) µinch (Note: L in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. On-site calibration available. |
| Metric, 0.002 mm resolution, up to 300 millimeters | (1.42 + 0.03L) µm (Note: L in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 12 inches | (24.91 + 2.97L) µinch (Note: L in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. |
| Metric, 0.001 mm resolution, up to 300 millimeters | (0.63 + 0.08L) µm (Note: L in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 12 inches | (24.91 + 2.97L) µinch (Note: L in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. On-site calibration available. |
| Metric, 0.001 mm resolution, up to 300 millimeters | (0.63 + 0.08L) µm (Note: L in 'millimeters') |
|
| Micrometer: Inside – 3 touch | ||
| Inch, 0.0002 inch resolution, up to 12 inches | (118.35 + 5.41D) µinch (Note: D in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. |
| Metric, 0.005 mm resolution, up to 300 millimeters | (3.01 + 0.005D) µm (Note: D in 'millimeters') |
|
| Inch, 0.0002 inch resolution, up to 12 inches | (118.35 + 5.41D) µinch (Note: D in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. On-site calibration available. |
| Metric, 0.005 mm resolution, up to 300 millimeters | (3.01 + 0.005D) µm (Note: D in 'millimeters') |
|
| Inch, 0.0001 inch resolution, up to 12 inches | (64.11 + 8.72D) µinch (Note: D in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. |
| Metric, 0.002 mm resolution, up to 300 millimeters | (1.63 + 0.009D) µm (Note: D in 'millimeters') |
|
| Inch, 0.0001 inch resolution, up to 12 inches | (64.11 + 8.72D) µinch (Note: D in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. On-site calibration available. |
| Metric, 0.002 mm resolution, up to 300 millimeters | (1.63 + 0.009D) µm (Note: D in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 12 inches | (39.96 + 5.94D) µinch (Note: D in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. |
| Metric, 0.001 mm resolution, up to 300 millimeters | (1.01 + 0.006D) µm (Note: D in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 12 inches | (39.96 + 5.94D) µinch (Note: D in 'inches') |
For the calibration of depth micrometers, SEP Métrologie calibration procedure IE‑017. On-site calibration available. |
| Metric, 0.001 mm resolution, up to 300 millimeters | (1.01 + 0.006D) µm (Note: D in 'millimeters') |
|
| Micrometer setting standard | ||
| Inch, up to 12 inches | (5 + 4L) µinch (Note: L in 'inches') |
For the calibration of micrometer setting standard. SEP Métrologie calibration procedure IE‑014. |
| Metric, up to 300 millimetres | (0.13 + 0.004L) µm (Note: L in 'millimeters') |
|
| Caliper: Outside | ||
| Inch, up to 24 inches | 310 µinch | For the calibration of outside calipers. SEP Métrologie calibration procedure IE‑012. |
| Inch, >24 to 4inches | 340 µinch | |
| Metric, up to 600 millimeters | 7.87 µm | |
| Metric, >600 to 1000 millimeters | 8.64 µm | |
| Inch, up to 24 inches | 310 µinch |
For the calibration of outside calipers. SEP Métrologie calibration procedure IE‑012. On-site calibration available. |
| Inch, >24 to 4inches | 340 µinch | |
| Metric, up to 600 millimeters | 7.87 µm | |
| Metric, >600 to 1000 millimeters | 8.64 µm | |
| Caliper: Inside | ||
| Inch, up to 12 inches | 290 µinch | For the calibration of inside calipers. SEP Métrologie calibration procedure IE 012. |
| Metric, up to 300 millimeters | 7.4 µm | |
| Inch, up to 12 inches | 290 µinch |
For the calibration of inside calipers. SEP Métrologie calibration procedure IE 012. On-site calibration available. |
| Metric, up to 300 millimeters | 7.4 µm | |
| Caliper: Depth | ||
| Inch, up to 12 inches | 290 µinch | For the calibration of depth calipers. SEP Métrologie calibration procedure IE 012. |
| Metric, up to 300 millimeters | 7.4 µm | |
| Inch, up to 12 inches | 290 µinch |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE 012. On-site calibration available. |
| Metric, up to 300 millimeters | 7.4 µm | |
| Caliper: Step | ||
| Inch, up to 12 inches | 290 µinch | For the calibration of step calipers. SEP Métrologie calibration procedure IE 012. |
| Metric, up to 300 millimeters | 7.4 µm | |
| Inch, up to 12 inches | 290 µinch |
For the calibration of step calipers. SEP Métrologie calibration procedure IE 012. On-site calibration available. |
| Metric, up to 300 millimeters | 7.4 µm | |
| Bore gauge | ||
| Inch, up to 12 inches | (24.91 + 3.09L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑018. |
| Metric, up to 300 millimetres | (0.63 + 0.003L) µm (Note: L in 'millimeters') |
|
| Inch, up to 12 inches | (24.91 + 3.09L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑018. On-site calibration available. |
| Metric, up to 300 millimetres | (0.63 + 0.003L) µm (Note: L in 'millimeters') |
|
| Probing comparator, Analogue: | ||
| Inch, 0.001 inch graduation, up to 4 inches |
120 µinch | For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. |
| Metric, 0.02 mm graduation, up to 100 millimeters | 3.05 µm | |
| Inch, 0.001 inch graduation, up to 4 inches |
120 µinch |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. On-site calibration available. |
| Metric, 0.02 mm graduation, up to 100 millimeters | 3.05 µm | |
| Inch, 0.0005 inch graduation, up to 4 inches | (57.33 + 0.67L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. |
| Metric, 0.01 mm graduation, up to 100 millimeters | (1.46 + 0.001L) µm (Note: L in 'millimeters') |
|
| Inch, 0.0005 inch graduation, up to 4 inches | (57.33 + 0.67L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. On-site calibration available. |
| Metric, 0.01 mm graduation, up to 100 millimeters | (1.46 + 0.001L) µm (Note: L in 'millimeters') |
|
| Inch, 0.0002 inch graduation, up to 4 inches | (22.67 + 1.33L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. |
| Metric, 0.005 mm graduation, up to 100 millimeters | (0.58 + 0.001L) µm (Note: L in 'millimeters') |
|
| Inch, 0.0002 inch graduation, up to 4 inches | (22.67 + 1.33L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. On-site calibration available. |
| Metric, 0.005 mm graduation, up to 100 millimeters | (0.58 + 0.001L) µm (Note: L in 'millimeters') |
|
| Probing comparator, Digital: | ||
| Inch, 0.00005 inch resolution, up to 4 inches | (28.33 + 1.67L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. |
| Metric, 0.001 mm resolution, up to 100 millimeters | (0.72 + 0.002L) µm (Note: L in 'millimeters') |
|
| Inch, 0.00005 inch resolution, up to 4 inches | (28.33 + 1.67L) µinch (Note: L in 'inches') |
For the calibration of depth calipers. SEP Métrologie calibration procedure IE‑019. On-site calibration available. |
| Metric, 0.001 mm resolution, up to 100 millimeters | (0.72 + 0.002L) µm (Note: L in 'millimeters') |
|
| Roundness | ||
| Metric, up to 50 millimeters | (0.083 + 0.001R) µm (Note: R is the roundness in 'micrometers') |
For the calibration of roundness. SEP Métrologie calibration procedure IE‑011. |
| Diameter | ||
| Metric, up to 50 millimeters | 0.91 µm | For the calibration of diameter. SEP Métrologie calibration procedure IE‑010, 33k6-4-1181-1 |