| Company name | Tool & Assembly Systems Inc. |
|---|---|
| Company address | 19 Kenview Blvd., Unit #53 Brampton, ON L6T 5G6 |
| Contact | Domenic LaRosa Telephone: (905) 458-4447 Email: dlarosa@toolassembly.com |
| Clients served |
|
| Fields of calibration |
|
| Accreditation body |
|
| ISO/IEC 17025 |
|
This CLAS Certificate is published by the CLAS service of the National Research Council of Canada (NRC) in cooperation with the laboratory accreditation program of the accreditation body. The accreditation body recognizes the capability of the named laboratory for being able to perform calibrations as per the listed Calibration and Measurement Capabilities with metrological traceability to the International System of Units (SI) or to standards acceptable to CLAS. See supplementary notes.
| Measured Quantity & Range or Instrument | Expanded Measurement Uncertainty | Type | Remarks |
|---|---|---|---|
| Torque Tools Clockwise and Counter Clockwise | |||
| 0.5 N•m to 5000 N•m | 0.95% of reading | II | ASTM E2624. For the calibration of torque tools with transducers. On-site calibration available. |
| Torque Tools Clockwise and Counter Clockwise | |||
| 2.5 N•m to 500 N•m | 0.95% of reading | II | ASTM E2624. For the calibration of manual torque tools. |