| Company name | Mesurepro Inc. |
|---|---|
| Company address | 106-86, Boulevard des Entreprises Boisbriand, QC Canada J7G 2T3 |
| Contact | Karim Bouyahia, President Telephone: 514-913-0820 Fax: 514-951-0675 Email: info@mesurepro.ca |
| Clients served |
|
| Fields of calibration |
|
| Accreditation body |
|
| ISO/IEC 17025 |
|
This CLAS Certificate is published by the CLAS service of the National Research Council of Canada (NRC) in cooperation with the laboratory accreditation program of the accreditation body. The accreditation body recognizes the capability of the named laboratory for being able to perform calibrations as per the listed Calibration and Measurement Capabilities with metrological traceability to the International System of Units (SI) or to standards acceptable to CLAS. See supplementary notes.
Thermometry
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Thermistor and Resistance Temperature Detector (RTD) | |||
| -196 ºC | 0.02 ºC | II | For the calibration of temperature measurement systems thermistor and resistance temperature detector (RTD). All probes are calibrated in comparison with a PRT in a thermometry dryblock. Mesurepro procedure PC 5.4.61. On‑site calibrations available. |
| -95 ºC to 140 ºC | 0.03 ºC | ||
| >140 ºC to 660 ºC | 0.09 ºC | ||
| >660 ºC to 1200 ºC | 2.1 ºC | ||
| Thermocouple | |||
| ‑196 ºC | 1.1 ºC + 0.5 % of reading | II | For the calibration of temperature measurement systems thermocouple. All probes are calibrated in comparison with a PRT in a thermometry dryblock. Mesurepro procedure PC 5.4.62. On‑site calibrations available. |
| -95 ºC to 1200 ºC | 1.1 ºC + 0.5 % of reading | ||
| Liquid in glass thermometers | |||
| ‑95 ºC to 140 ºC | 0.07 ºC | II | For the calibration of liquid in glass thermometers. All thermometers are calibrated in comparison with a PRT in a thermometry dryblock. Mesurepro procedure PC 5.4.60. On‑site calibrations available. |
| >140 ºC to 300 ºC | 0.12 ºC | ||
| Radiation Thermometry | |||
| Infrared radiation thermometers | |||
| 35 ºC to 400 ºC | 2.5 ºC | II | For the calibration of infrared thermometers at emissivity setting of 0.95 with spectral band of 8 to 14 µm. Mesurepro procedure PC 5.4.170. On‑site calibrations available. |
| Temperature Controlled Chambers | |||
| ‑55 ºC to ‑40 ºC | 4 ºC | II | For the calibration of temperature controlled chambers. All chambers are calibrated by characterisation in temperature of the volume used. Mesurepro procedure PC 7.2.30. On‑site calibrations available. |
| >‑40 ºC to 140 ºC | 0.6 ºC | ||
| >140 ºC to 600 ºC | 4 ºC | ||
| Temperature and Pressure Controlled Chambers ("Vacuum oven") | |||
| 0 ºC to 140 ºC | 0.6 ºC | II | For the calibration of temperature controlled chambers ("vacuum oven"). All chambers are calibrated by characterisation in temperature of the volume used. Mesurepro procedure PC 7.2.30‑1. On‑site calibrations available. |
| ‑14.5 psi | 1 psi | For the calibration of pressure controlled chambers ("vacuum oven"). All chambers are calibrated by characterisation of pressure measurement. Mesurepro procedure PC 7.2.30‑1. On‑site calibrations available. | |
| Thermal bath | |||
| ‑100 ºC to 660 ºC | 0.2 ºC | II | For the calibration of thermal bath. All baths are calibrated in comparison with a PRT. Mesurepro procedure PC 7.8.63. |
Humidity
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Relative Humidity | |||
| 15 °C to 60 °C 20 % to 90 % RH | 1.8 % RH | II | Source. For the calibration of relative humidity and temperature measuring instruments. Mesurepro procedure PC 5.4.110. |
Electrical
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Voltage, DC | |||
| 0.0000 mV to 10.0000 mV | 0.050 % + 7 μV | II | Source. For the calibration of dc voltage measuring devices. On‑site calibration is available. |
| 10.000 mV to 100.000 mV | 0.010 % + 7 μV | ||
| 0.10000 V to 1.00000 V | 0.006 % + 10 μV | ||
| 1.0000 V to 10.0000 V | 0.006 % + 50 μV | ||
| 10.000 V to 100.000 V | 0.006 % + 1000 μV | ||
| 100.00 V to 1000.00 V | 0.010 % + 20000 μV | ||
| Current, DC | |||
| 0.000 μA to 200.00 μA | 0.050 % + 0.02 μA | II | Source. For the calibration of dc current measuring devices. On‑site calibration is available. |
| 0.20000 mA to 2.00000 mA | 0.025 % + 0.1 μA | ||
| 2.0000 mA to 20.0000 mA | 0.015 % + 0.6 μA | ||
| 20.000 mA to 200.000 mA | 0.015 % + 6 μA | ||
| 0.2000 A to 2.0000 A | 0.015 % + 100 μA | ||
| 2.000 A to 20.0000 A | 0.1 % + 2 mA | ||
| Resistance | |||
| 10 Ω | 0.05 % + 50 mΩ | II | Source. For the calibration of resistance measuring devices. On‑site calibration is available. |
| 100 Ω | 0.05 % | ||
| 1 kΩ | 0.02 % | ||
| 10 kΩ | 0.02 % | ||
| 100 kΩ | 0.02 % | ||
| 1 MΩ | 0.05 % | ||
| 10 MΩ | 0.05 % | ||
| 100 MΩ | 0.5 % | ||
| Measured Quantity & Range or Instrument | Frequency | Calibration Measurement Capability expressed as an uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|---|
| Voltage, AC | ||||
| 1.0000 mV to 10.0000 mV | 20.000 Hz to 400.000 Hz | 0.20 % + 0.025 mV | II | Source. For the calibration of sinusoidal wave voltage measuring devices. Note: Voltage ranges 100 V and 1000 V from 40 Hz to 1kHz. On‑site calibration is available. |
| 400.000 Hz to 10.00 kHz | 0.2 % + 0.03 mV | |||
| 10.000 mV to 100.000 mV | 20.000 Hz to 400.000 Hz | 0.10 % + 0.05 mV | ||
| 400.000 Hz to 10.00 kHz | 0.15 % + 0.07 mV | |||
| 0.10000 V to 1.00000 V | 20.000 Hz to 400.000 Hz | 0.05 % + 0.05 mV | ||
| 400.000 Hz to 10.00 kHz | 0.07 % + 0.1 mV | |||
| 1.0000 V to 10.0000 V | 20.000 Hz to 400.000 Hz | 0.05 % + 0.5 mV | ||
| 400.000 Hz to 10.00 kHz | 0.07 % + 3 mV | |||
| 10.000 V to 100.000 V | 20.000 Hz to 400.000 Hz | 0.05 % + 10 mV | ||
| 400.000 Hz to 10.00 kHz | 0.07 % + 30 mV | |||
| 10.00 V to 1000.00 V | 20.000 Hz to 400.000 Hz | 0.07 % + 0.2 V | ||
| 400.000 Hz to 10.00 kHz | 0.10 % + 0.3 V | |||
| Current, AC | ||||
| 1.000 μA to 200.000 μA | 20.000 Hz to 200.000 Hz | 0.25 % + 0.02 μA | II | Source. For the calibration of sinusoidal wave current measuring devices. On‑site calibration is available. |
| 200.000 Hz to 1000.00 Hz | 0.20 % + 0.2 μA | |||
| 0.20000 mA to 2.00000 mA | 20.000 Hz to 200.000 Hz | 0.10 % + 0.2 μA | ||
| 200.000 Hz to 1000.00 Hz | 0.10 % + 0.4 μA | |||
| 2.0000 mA to 20.0000 mA | 20.000 Hz to 200.000 Hz | 0.07 % + 1 μA | ||
| 200.000 Hz to 1000.00 Hz | 0.10 % + 4 μA | |||
| 20.000 mA to 200.000 mA | 20.000 Hz to 200.000 Hz | 0.07 % + 10 μA | ||
| 200.000 Hz to 1000.00 Hz | 0.10 % + 40 μA | |||
| 0.2000 A to 2.0000 A | 20.000 Hz to 200.000 Hz | 0.10 % + 0.1 mA | ||
| 200.000 Hz to 1000.00 Hz | 0.15 % + 1 mA | |||
| 2.0000 A to 20.000 A | 20.000 Hz to 200.000 Hz | 0.20 % + 3 mA | ||
| 200.000 Hz to 1000.00 Hz | 0.25 % + 10 mA | |||
| Current clamp calibration | ||||
| Effective AC current output | ||||
| 1 A turns to 1000 A Turns | 20.000 Hz to 200.000 Hz | 0.42 % + 4.2 mA | II | Source using a multifunction calibrator and a 50 turn coil. For the calibration of clamp meters. On‑site calibration is available. |
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) |
Type of Service | Remarks |
|---|---|---|---|
| Current clamp calibration | |||
| Effective DC current output | |||
| 1 A Turns to 1000 A Turns | 0.37 % + 3.3 mA | II | Source using a multifunction calibrator and a 50 turn coil. For the calibration of clamp meters. On-site calibration is available. |
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Electrical Calibration of Temperature Indicators and Simulators | |||
| Thermocouple simulation | |||
| Type C | |||
| 0 ºC to 2316 ºC | 1.6 ºC | II | Source for type C. For the calibration of temperature indicators and process calibrators by electrical simulation of temperature. Mesurepro procedure PC 5.4.70. On‑site calibration available. |
| Type J | |||
| ‑210 ºC to 1200 ºC | 0.5 ºC | II | Source for type J. For the calibration of temperature indicators and process calibrators by electrical simulation of temperature. Mesurepro procedure PC 5.4.70. On‑site calibration available. |
| Type K | |||
| ‑210 ºC to 1200 ºC | 0.6 ºC | II | Source for type K. For the calibration of temperature indicators and process calibrators by electrical simulation of temperature. Mesurepro procedure PC 5.4.70. On‑site calibration available. |
| Type N | |||
| ‑200 ºC to 1300 ºC | 0.8 ºC | II | Source for type N. For the calibration of temperature indicators and process calibrators by electrical simulation of temperature. Mesurepro procedure PC 5.4.70. On‑site calibration available. |
Time and Frequency
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Frequency | |||
| 0.1000 Hz to 2.00000 MHz | 0.005 % | II | Source. For the calibration of frequency measuring devices. On‑site calibration is available. |
Pressure
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Pneumatic | |||
| ‑12 psi to 0 psi | 0.1 % FS | II | Vacuum gauge. Mesurepro procedure PC 5.4.50. Mobile and On‑site calibration available. |
| 0 psi to 300 psi | 0.1 % FS | Gauge. Mesurepro procedure PC 5.4.50. Mobile and On‑site calibration available. | |
| Hydraulic | |||
| ‑300 psi to 16000 psi | 0.1 % FS | II | Gauge. Mesurepro procedure PC 5.4.50. |
Force
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Torque | |||
| Clockwise and Counterclockwise | |||
| 0.73 ft•lb to 750 ft•lb | 1 % of reading | II | For the calibration of torque wrenches and screwdrivers. Mesurepro procedure PC 7.2.140. |
| 0.73 ft•lb to 750 ft•lb | 3 % of reading | For the calibration of torque wrenches and screwdrivers. Mesurepro procedure PC 7.2.140. Mobile and On‑site calibration available. | |
Mass
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Balances (Electronic, Non Automatic) | |||
| 80 g | 0.13 mg | II | For the calibration of electronic and non automatic balance. The calibration measurement capability is based upon the use of OIML R111 Class E2 reference weights. On‑site calibration available. |
| 220 g | 0.22 mg | ||
| 1 kg | 6 mg | ||
| 6 kg | 27 mg | ||
| 10 kg | 174 mg | ||
| 30 kg | 1459 mg | ||
Volume
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Piston Pipette | |||
| 0.2 µl | 0.2 µl | II | For the calibration of single channel and multi‑channel pipettes as per ISO 8655‑7. On‑site calibration available. |
| 1 µl | 0.2 µl | ||
| 2 µl | 0.2 µl | ||
| 5 µl | 0.2 µl | ||
| 10 µl | 0.46 µl | ||
| 20 µl | 0.46 µl | ||
| 50 µl | 0.46 µl | ||
| 100 µl | 4.7 µl | ||
| 200 µl | 4.7 µl | ||
| 250 µl | 4.7 µl | ||
| 500 µl | 11 µl | ||
| 1000 µl | 23 µl | ||
| 1250 µl | 23 µl | ||
| 2500 µl | 23 µl | ||
| 5000 µl | 23 µl | ||
Dimensional
| Measured Quantity & Range or Instrument | Calibration Measurement Capability expressed as an Uncertainty (±) (See supplementary notes) | Type of Service | Remarks |
|---|---|---|---|
| Indicators, Analog: | |||
| Inch, 0.00005 inch graduation | 39 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20‑5. On‑site calibration available. |
| Inch, 0.0001 inch graduation | 63 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20‑5. On‑site calibration available. |
| Inch, 0.0005 inch graduation | 290 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20‑5. On‑site calibration available. |
| Inch, 0.001 inch graduation | 578 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20‑5. On‑site calibration available. |
| Metric, 0.001 mm graduation | 0.8 µm | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20‑5. On‑site calibration available. |
| Metric, 0.002 mm graduation | 1.3 µm | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20‑5. On‑site calibration available. |
| Metric, 0.01 mm graduation | 5.8 µm | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20‑5. On‑site calibration available. |
| Indicators, Digital: | |||
| Inch, 0.00005 inch resolution | 39 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20-5. On-site calibration available. |
| Inch, 0.0001 inch resolution | 63 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20-5. On-site calibration available. |
| Inch, 0.0005 inch resolution | 290 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20-5. On-site calibration available. |
| Inch, 0.001 inch resolution | 578 µinch | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20-5. On-site calibration available. |
| Metric, 0.001 mm resolution | 0.8 µm | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20-5. On-site calibration available. |
| Metric, 0.002 mm resolution | 1.3 µm | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20-5. On-site calibration available. |
| Metric, 0.01 mm resolution | 5.8 µm | II | For the calibration of indicators. Mesurepro calibration procedure PC 7.2.20-5. On-site calibration available. |
| Bore Gages | |||
| Inch, up to 8 inches | 109 µinch | II | For the calibration of bore gages. Mesurepro calibration procedure PC 7.2.20‑3. On‑site calibration available. |
| Metric, up to 300 mm | 3.5 µm | II | For the calibration of bore gages. Mesurepro calibration procedure PC 7.2.20‑3. On‑site calibration available. |
| Calipers: Outside | |||
| Inch, up to 12 inches | 324 µinch | II | For the calibration of outside calipers. Mesurepro calibration procedure PC 7.2.20‑1. On‑site calibration available. |
| >12 inches to 24 inches | 405 µinch | ||
| Metric, up to 300 mm | 7 µm | II | For the calibration of outside calipers. Mesurepro calibration procedure PC 7.2.20‑1. On‑site calibration available. |
| >300 mm to 600 mm | 9 µm | ||
| Micrometers: Outside | |||
| Inch, up to 8 inches | 97 µinch | II | For the calibration of outside micrometers. Mesurepro calibration procedure PC 7.2.20‑2. On‑site calibration available. |
| Metric, up to 300 mm | 3.5 µm | II | For the calibration of outside micrometers. Mesurepro calibration procedure PC 7.2.20‑2. On‑site calibration available. |
| Height Gauges | |||
| Inch, up to 24 inches | 530 µinch | II | For the calibration of height gauges. Mesurepro calibration procedure PC 7.2.20‑4. |
| Metric, up to 600 mm | 13 µm | II | For the calibration of height gauges. Mesurepro calibration procedure PC 7.2.20‑4. |