| Company name | Select Calibration Incorporated |
|---|---|
| Company address | 213 Fourth St. P.O. Box 96
Rodney, Ontario N0L 2C0 |
| Contact | Ron Jakl
Telephone: 519-902-7215 Email: ronjakl@selectcalibration.ca |
| Clients served |
|
| Fields of calibration | |
| Accreditation body |
|
| ISO/IEC 17025 |
|
This CLAS Certificate is published by the CLAS service of the National Research Council of Canada (NRC) in cooperation with the laboratory accreditation program of the accreditation body. The accreditation body recognizes the capability of the named laboratory for being able to perform calibrations as per the listed Calibration and Measurement Capabilities with metrological traceability to the International System of Units (SI) or to standards acceptable to CLAS. See supplementary notes.
Dimensional
Coordinate Measuring Machines (CMM)
Acceptance and reverification tests for CMM – CMMs used for measuring size.
On-site services as per ASME B89.4.10360-2, ISO 10360-2 and SCI-011. See note Footnote 1
| Measured Quantity & Range or Instrument | Expanded Measurement Uncertainty | Type | Remarks |
|---|---|---|---|
| Gauge, length: | |||
| 10 to 1010 mm | ± (0.00099 + 0.00121L + 0.00035L2) mm where L is the length in m |
III | See note Footnote 2 |
| Laser and Gauge Block, length: | |||
| 10 to 6000 mm | ± (0.0004 + 0.0011L + 0.00002L2) mm where L is the length in m |
III | See note Footnote 3 |
| Sphere, repeatability Rpt: | |||
| Up to 30 mm | 0.0007 mm | III | N/A |
| Gauge, repeatability R0: | |||
| 10 to 1010 mm | 0.0004 mm | III | N/A |
| Laser and Gauge Block, repeatability R0: | |||
| 10 to 6000 mm | 0.0004 mm | III | N/A |